Any tips on how to remove

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Kcchief434

Junior Member
Joined
Nov 6, 2018
Posts
6
Reaction score
0
Location
Mays landing nj
Ram Year
2015
Engine
6.4
I removed all my emblems and waxed all the areas and it looks clean but the only problem was one spot where the heavy duty logo was underneath it's hazy any tips on what to do or do I just buy emblems and put them back on0fe18c8d2de24a11672fb86df70bda7f.jpg

Sent from my SM-J737V using Tapatalk
 

Burla

Senior Member
Military
Joined
Apr 28, 2012
Posts
23,115
Reaction score
44,461
Ram Year
2010 Hemi Reg Cab 4x4
Engine
Hemi
heat gun removes any residue, polish removes hazy clear coat, best results with a polisher and not by hand. Most polishes have diminishing abrasives, the need a polisher to work best. I can't see, is the clear coat damaged? If so yeah that is fatal, can't fix that with an product except more CC.
 
OP
OP
K

Kcchief434

Junior Member
Joined
Nov 6, 2018
Posts
6
Reaction score
0
Location
Mays landing nj
Ram Year
2015
Engine
6.4
heat gun removes any residue, polish removes hazy clear coat, best results with a polisher and not by hand. Most polishes have diminishing abrasives, the need a polisher to work best. I can't see, is the clear coat damaged? If so yeah that is fatal, can't fix that with an product except more CC.
I cant really tell all i did was pull the emblem and pull off residue with my finger and there was that lighter spot under where the emblem was

Sent from my SM-J737V using Tapatalk
 

MADDOG

Not RamForum Staff
Supporting Member
Military
Joined
Dec 26, 2011
Posts
14,443
Reaction score
9,877
Location
Arizona
It's cut and buff time.

If you can't get that haze off with some adhesive remover, then with some wax; get some light rubbing compound and polish the area. Then give it a good waxing after you determine if the rubbing compound took care of the haze.
 
OP
OP
K

Kcchief434

Junior Member
Joined
Nov 6, 2018
Posts
6
Reaction score
0
Location
Mays landing nj
Ram Year
2015
Engine
6.4
It's cut and buff time.

If you can't get that haze off with some adhesive remover, then with some wax; get some light rubbing compound and polish the area. Then give it a good waxing after you determine if the rubbing compound took care of the haze.
I used turtle wax rubbing compound. No luck. All the residue is gone its just a light area that was under the heavy duty emblem. Weird that the spot under the emblem looks faded. i thought it would be the other way around.?

Sent from my SM-J737V using Tapatalk
 

MADDOG

Not RamForum Staff
Supporting Member
Military
Joined
Dec 26, 2011
Posts
14,443
Reaction score
9,877
Location
Arizona
I would think it would look a bit darker than the uncovered areas around it.
 

Moparfanatic21

U.S. Marine Vet - 0321, Now a Doctor...of Vehicles
Military
Joined
Apr 13, 2015
Posts
1,066
Reaction score
459
Ram Year
2006
Engine
Hemi 5.7
To me it almost looks like not enough paint under the clear
 
Top