Need some help

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Mopar89rc

Junior Member
Joined
Apr 20, 2019
Posts
2
Reaction score
0
Location
Fresno
Ram Year
1989
Engine
5.9
hi I have an 89 ramcharger and I’m going to lift it but not sure what to do it has 3 1/2 blocks in the rear which as far as I know are stock and I’m wanting to do a four inch lift but if I do that wouldn only give me half inch more may may be a dumb ? But I need some help and any of it would be appreciated
 

crazzywolfie

Senior Member
Joined
Apr 6, 2013
Posts
16,422
Reaction score
3,183
Location
under the truck
Ram Year
81 93
Engine
5.2
just buy taller lift springs for the rear so you can remove the blocks. there is still a chance you may need something similar to a ladder bar setup to prevent axle wrap but you are more likely to have axle wrap if you lift it and keep the blocks.
 
Top