K & N CAI Install

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Tulet

Member
Joined
Mar 29, 2018
Posts
48
Reaction score
65
Location
Killeen, TX
Ram Year
2018
Engine
5.7 Hemi
Just finished installing the K&N CAI on my 2018 Longhorn with 5.7 Hemi. I've already installed the Edge Pulsar Tuner and the new sound is AMAZING. Much more throaty growl at about 2000 rpm. The only issue with the install was the crank case vent hose. The supplied hose was smaller in diameter than the factory tube that had to be trimmed. I got it on but will have to look into a bigger diameter hose. Additionally the elbow fitting for the hose to alleviate kinking was also to large for the supplied hose. The only fitting the hose actually fit was the fitting where the hose connects to the air intake tube. Other than those minor issues, it sounds and runs great.
 

abouttobeglue

Senior Member
Joined
Sep 3, 2016
Posts
612
Reaction score
286
Ram Year
2016
Engine
5.7
K&n has pretty good customer service, I called them cause I cracked the elbow fitting for the crank case and they sent me a new one and a new hose.
 
Top