What did you do with your 4th Gen this week?

PunisherFitness · Jun 23, 2019

RusslRam said:
Etched a projector lens when practicing that would match ur theme.

Sent from my Pixel using Tapatalk

Where do I get these? Would look great on my Punisher Ram

hodge-xj · Jun 23, 2019

So in an effort to be ready for my suspension update I got my rear shocks swapped out, relocated brake lines and looked at a few of the extra bits I have. I forgot how much of a pita it is with those liners. Left them out so it's a pretty easy deal when coils show up. This fiasco ended up *********** into a full flare and flap removal as well as the color match on upper bumper and the initial steps of a paint repair where the flares rubbed badly. Even with 3m tape the flares wore through the tape in spots and into the paint. Wet sanded them out and hand buffed. Need to get an electric buffer and run over the whole truck once. Good enough for now and don't think I'll be putting them back on. Looks half assed again.

Sent from my SM-N920V using Tapatalk

RusslRam · Jun 23, 2019

usaf2006 said:
That is so sick. How much for a USAF symbol

Don't really sell them. I could make them if u want at cost for material. Haven't done a USAF but have done Marine.

Sent from my Pixel using Tapatalk

RusslRam · Jun 23, 2019

PunisherFitness said:
View attachment 170930

Where do I get these? Would look great on my Punisher Ram

I would do it for material cost. Cheap maybe $20 plus the cost of the round trip shipping. U can buy etched lenses from Theretrofitsource.com starting at $75 I think.

Sent from my Pixel using Tapatalk

Svorhess · Jun 23, 2019

Line-x bed liner and rockers

https://www.facebook.com/photo.php?fbid=10216875002041532&set=a.1447441580235&type=3&sfns=mo

https://www.facebook.com/photo.php?fbid=10216875002321539&set=a.1447441580235&type=3&sfns=mo

https://www.facebook.com/photo.php?fbid=10216875000881503&set=a.1447441580235&type=3&sfns=mo

MAJ_Charlie · Jun 23, 2019

Finally got around to installing my Bilstein shocks on the rear along with the TUFF Truck 1211 springs. Getting the rear shocks off took more time than I expected. The only shorty wrench I had was 18mm so I had to "MacGyver" it into a 21mm open end. While I had the brake calibers and brackets off I decided to paint them black and change the pads. Now my rear suspension is complete. Did the Core 4x4 rear UCA, LCA, swaybar end links, and track bar a few weeks ago. Hoping to finish the job tomorrow after work in the front with JBA UCAs, MAXXSuspension swaybar end links, Bilstein B5100 adjustable shocks and new coils, paint the calibers and brackets, and change the pads.

revitupmoto33 · Jun 23, 2019

First time I’ve ran some hi-speed trails since changing the valving on the front King’s. What a world of difference, washboards are very controlled now and they took a couple big hits like a champ. Very satisfied!
Camp in Big Bear then 2N02 to Pioneer Town

usaf2006 · Jun 23, 2019

RusslRam said:
Don't really sell them. I could make them if u want at cost for material. Haven't done a USAF but have done Marine.

Sent from my Pixel using Tapatalk

Are they easy to install? Lol. I'd totally take a pair knowing I could install them myself.

moparpeetie · Jun 23, 2019

Puba08 said:
Installed Modifystreet black quads, Morimoto Fogs, and Zone body lift (halfway, the rear will be done tomorrow). That said...the Zone instructions for the body lift are horrible. It says 3-5 hours for install...BS. Took me 8.5 hours to do the front (minus air tools and also installing lights). Hopefully tomorrow goes smoother.
Here’s some pics so far (truck is filthy btw)

Zone Body lift 1.5 w/ bils at 2.8. Getting about 42”.

Black Quads and Fogs installed.

Sent from my iPhone using Tapatalk Pro

zone directions are a complete joke... But with air it only took me 3-5 hours total. Without air it would've been a nightmare!
Looks frickin' awesome,,, fine Job!!!!

Krein · Jun 24, 2019

Got a load of 3/4 inch stone, she is definitely sagging a little

RusslRam · Jun 24, 2019

usaf2006 said:
Are they easy to install? Lol. I'd totally take a pair knowing I could install them myself.

U can do it urself. Depending on what type of lights u currently have it can be difficult. If u have projectors already simple swap but if u have quads u will have to retrofit projectors into them. Either way u have to open them up.

Sent from my Pixel using Tapatalk

Ramsolid · Jun 24, 2019

Stephonsky said:
Not this weekend but 2 weekends ago i got my new wheels and tires. Went from stockies to 20x10 XD series Buck 25 with a -24 offset wrapped in 285/55 Cooper AT3 XLTs. Love the set up. Makes me want to go from a level to a 3” lift but i love the skirted look. #CustomOffsets FTW

View attachment 170859

I’m thinking about that size wheel , what would you say you got for tire poke ?

usaf2006 · Jun 24, 2019

RusslRam said:
U can do it urself. Depending on what type of lights u currently have it can be difficult. If u have projectors already simple swap but if u have quads u will have to retrofit projectors into them. Either way u have to open them up.

Sent from my Pixel using Tapatalk

Ok. I've never opened up a set before. I'll do some YouTube research on it and I'll get back to you when I'm ready haha!

22hemi13 · Jun 24, 2019

My wife joined this forum now too. Since she’s got her truck she wants a piece of the action. Easy now don’t spend all our money on her mods lolololol @Vi_17

Pull Ya · Jun 24, 2019

Welcome--glad to have you. Maybe you can provide some adult supervision that at times is sorely needed. I like your truck--looks really good--especially the color--LOL
Jay

JimsRamTruck2012 · Jun 24, 2019

All I did over the weekend was drive both trucks. Took the 2012 to my cousin's high school graduation. All of that took a lot of effort. :sleepy:

deanoldo · Jun 24, 2019

The wife wanted a fountain, so I hauled out a yard or so of dirt and sod and then hauled about a yard of rock back in along with a couple of small trees and fountain hardware. She likes the end result, so it was a win.

Micah12 · Jun 24, 2019

install of the dz tailgate

McBroom · Jun 24, 2019

22hemi13 said:
My wife joined this forum now too. Since she’s got her truck she wants a piece of the action. Easy now don’t spend all our money on her mods lolololol @Vi_17

Tell her Welcome Aboard from Denison Texas

- The Blue Mule

Puba08 · Jun 24, 2019

Removed the fender flares while installing body lift and found the paint screwed up nicely

The original owner put on the flares for a chrome bumper. I’m hoping I can get the yellow mark out (any suggestions?) and touch up the two spots on the other side.
Looks like I’m putting flares back on with some vinyl to make sure it doesn’t get worse.

Sent from my iPhone using Tapatalk Pro

What did you do with your 4th Gen this week?

Member

Senior Member

Senior Member

Senior Member

Junior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

U.S. MARINE VETERAN

Senior Member

Member

Member

U.S.Marine Veteran Retired 88-2000

Senior Member

Similar threads

Forum statistics

Share this page