Anyone have these? DV8 Bumpers

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

SOKY_RAM

Senior Member
Joined
Mar 17, 2016
Posts
457
Reaction score
789
Location
Bowling Green, KY
Ram Year
2021
Engine
6.4
Don't try to talk me out of it since I have already ordered them but I was just curious if anyone had these?
if not stay tuned and I'll let you know how it goes. They are DV8 brand. I wasn't going to do the bumpers on this one, but I backed into a pole and dented the aluminum foil factory bumper this last weekend.

upload_2019-8-21_15-27-24.png
upload_2019-8-21_15-27-53.png
 

KeepRight

ExFalconFxr
Joined
Jun 18, 2018
Posts
328
Reaction score
190
Location
US
Ram Year
2015
Engine
EcoDiesel
Don't try to talk me out of it since I have already ordered them but I was just curious if anyone had these?
if not stay tuned and I'll let you know how it goes. They are DV8 brand. I wasn't going to do the bumpers on this one, but I backed into a pole and dented the aluminum foil factory bumper this last weekend.

View attachment 177383
View attachment 177384
Dude those are Bad Ass! Send pics when done.

Sent from my SM-N960U using Tapatalk
 
OP
OP
SOKY_RAM

SOKY_RAM

Senior Member
Joined
Mar 17, 2016
Posts
457
Reaction score
789
Location
Bowling Green, KY
Ram Year
2021
Engine
6.4

Ross Thompson

Member
Joined
Jul 9, 2019
Posts
59
Reaction score
244
Location
Texas
Ram Year
2013
Engine
6.7 Cummins
Both look great to me and about half the price of my Ranch Hand replacement bumpers.

Sent from my moto z4 using Tapatalk
 
OP
OP
SOKY_RAM

SOKY_RAM

Senior Member
Joined
Mar 17, 2016
Posts
457
Reaction score
789
Location
Bowling Green, KY
Ram Year
2021
Engine
6.4
Rear looks good, but front has to many slot cutouts. Just my .02

I thought the same initially, and I think it would look better solid, but I also know there is a lot of cooling stuff up front on these trucks that need some airflow, especially with the Cummins. I may try to put some type of mesh behind the slots to see if that makes them a little more subtle.
 

huntergreen

Senior Member
Military
Joined
Jan 5, 2011
Posts
12,187
Reaction score
25,933
Ram Year
2016
Engine
hemi 5.7
Looks good to me. Of course in Jersey we have to run a front license plate.
 

East0352

Member
Joined
Feb 3, 2018
Posts
56
Reaction score
46
Location
Hernando, MS
Ram Year
2021
Engine
6.7L Cummins
I recently picked up the Steelcraft Fortis bumper. 3/8” thick on load-bearing surfaces, 5/16” thick on all others. Didn’t come with lights. $435. In Missouri, trucks that pull trailers above 6000lbs only have front bumpers. Don’t get caught pulling more than you put down on registration.

E6AAB16E-24E9-4ACD-8E23-D7B8830931EC.jpeg
 

RamblinRhoades

Junior Member
Joined
Jun 3, 2019
Posts
2
Reaction score
2
Location
80461
Ram Year
2014
Engine
Hemi 6.4
The instructions for install found on DV8 website were for a previous version of their bumper. The brackets for the rear did not line up correctly with the holes. had to improvise a little and drill some new holes, but looks nice and is solid. The front bumper came with the lights, but once I had it installed I did not like how far it stuck out. So I removed it cut 2" off of the mounts, drilled new holes, and cut a tighter line along the top edge. It looks way better in my opinionIMG_20190822_115518214_HDR_LI.jpg IMG_20190823_143336393_HDR.jpg
 

boblonben

Senior Member
Joined
Jul 23, 2016
Posts
587
Reaction score
296
Location
Texas
Ram Year
2017
Engine
Hemi 5.7
Sorry, but neither do anything for me. Pretty much do not like oversized, over done bumpers.
 

Latest posts

Staff online

Forum statistics

Threads
194,926
Posts
2,864,180
Members
155,296
Latest member
VLG6963
Top