19RCSB
Junior Member
When I ordered my truck I was going order the Rambox option until I went and looked at one in person. It's a great idea, but I was not impressed with the construction and fit and finish. The one I looked at didn't close and fit as nicely as I had expected. After thinking it over, I decided not to order the Ramboxes.
So I went a different route for lockable storage. I made this plywood box which fits into the bed divider slots in the side walls of the box. It is completely removable by lifting it out with the top handles. It locks down securely with toggle clamps attached to the tie down hooks in the bed.
When the tailgate is locked it is completely secure. You can't release the clamps and remove the box with the tailgate up. They are only accessible from the rear. It's made of 1/2" marine plywood, and I coated it with Herculiner bed liner paint. Most of the hardware is stainless.
I think it will be handy for things like golf clubs, or anything that I don't want exposed. I'll try it for a while and see how it goes. If it gets to be in the way too much I can just take it out and store it in the garage.
So I went a different route for lockable storage. I made this plywood box which fits into the bed divider slots in the side walls of the box. It is completely removable by lifting it out with the top handles. It locks down securely with toggle clamps attached to the tie down hooks in the bed.
When the tailgate is locked it is completely secure. You can't release the clamps and remove the box with the tailgate up. They are only accessible from the rear. It's made of 1/2" marine plywood, and I coated it with Herculiner bed liner paint. Most of the hardware is stainless.
I think it will be handy for things like golf clubs, or anything that I don't want exposed. I'll try it for a while and see how it goes. If it gets to be in the way too much I can just take it out and store it in the garage.