Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Oh they are (Infotainment). They overplayed their hand on the 12” screen though. They are selling the 12” upgrade for $4000. You can find the radio module, 12” screen with entire bezel, and the LDVS cable for $1500 all day long. When guys first started swapping them in just plug n play, the volume and tune knobs wouldn’t work. They made a Genie for the kit that solved that problem, so basically, $2500 of that kit is for that genie. Now that it was figured out with AlfaOBD, there’s no need for that genie anymore.I've found one too near southern Illinois for $450. I'm tempted to buy a 12" one. They seem to always be selling them with the bezel included at fairly low prices (relative to the UAQ). It's probably because the resellers aren't gobbling them up and jacking up the price ...cough (Infotainment) cough...
Sent from my HTC U11 using Tapatalk
I’ll start a new one sometime tomorrow once I can document a few more pics while I put everything back together.I am wondering if we should start a new thread for installing these radios with the separate radio module / screen? Jimmy07 is posting a lot of good information that may get lost or overlooked in a UAQ / UAS titled thread. Several folks, including myself, are getting interested in this so more information and experiments will surely be forthcoming.
I’ll start a new one sometime tomorrow once I can document a few more pics while I put everything back together.
Did you install the ATC wiring with it?Since installing my 2018 8.4 UAQ my wife has noticed that when I have the temperature set via the radio to the lowest setting it's cool but not really cold unless I turn on MaxAC. Is this a known issue? I installed the climate module behind the glove box and it does work but not as cold as I think it should be at what appears to be the lowest setting. Thanks for any insight.
Thanks, that's what I thought. I believe my BCM is corrupt since using AutoEnginuity. The dealer has flashed it 3 times and all settings will not go back to stock. Refer to my Post #1946 & Post #1877You can swap the BCM without even reprogramming it lol
Why do you need a new Bcm
There’s very little difference is from 2016 and on
Since installing my 2018 8.4 UAQ my wife has noticed that when I have the temperature set via the radio to the lowest setting it's cool but not really cold unless I turn on MaxAC. Is this a known issue? I installed the climate module behind the glove box and it does work but not as cold as I think it should be at what appears to be the lowest setting. Thanks for any insight.
Shoot me a PM with price and the VIN it came from if you have it. I'm concerned that it was for a manual but maybe that doesn't matter.Do u need a bcm I sell u this one I have
I done with this
I going back to a ra4 or adding a back cam rearview mirror
Mine does this , visually it looks like I’m at bottom of the blue but I have to keep hitting down until I can feel the cold , hitting max ac I think does it for you . This is why I’m upgrading to the auto ac .
Sent from my iPhone using Tapatalk
Yep me too. I feel stupid for not realizing I was going to have to do the ATC conversion after the upgrade I'm sure it was mentioned somewhere and I just missed it. That's fine adding the 8.4 NAV unit with Carplay for me at least has been a game changer it's expensive but totally worth it especially since I got the truck for such a great price to start with.
Yep me too. I feel stupid for not realizing I was going to have to do the ATC conversion after the upgrade I'm sure it was mentioned somewhere and I just missed it. That's fine adding the 8.4 NAV unit with Carplay for me at least has been a game changer it's expensive but totally worth it especially since I got the truck for such a great price to start with.
So is all you need to do to get it to full hot or full cold just hold it a little longer (as opposed to doing the ATC upgrade)?Yep It was mentioned I did see it but forget honestly .
Have a order in for the harness , already have the sensor .
There is a thread on doing this atc conversion
Sent from my iPhone using Tapatalk
So is all you need to do to get it to full hot or full cold just hold it a little longer (as opposed to doing the ATC upgrade)?
Sent from my HTC U11 using Tapatalk