Thorbeast
Senior Member
4th Gen projector headlights, I need at least one, but I'll take extras, of the bolts that hold on the dust cover. Got a used set but I'm missing a bolt. Worried about stripping the hole if I just use a random bolt
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
That was my plan. It isn't a machine screw like an m10x1.5 pitch, it's a hex head real coarse thread going into plastic so I feel like i could strip the hole out easily using a random screwYou could take bolt to local hardware store and loose fit it in nuts until you find the size and thread. Then pick the bolt that will work once you know specs. Granger is also a place to go, but you will get bulk boots when you need only one.
I have at least 10, pm if you still need4th Gen projector headlights, I need at least one, but I'll take extras, of the bolts that hold on the dust cover. Got a used set but I'm missing a bolt. Worried about stripping the hole if I just use a random bolt