Finally in a 4th Gen (Build Thread)

Graygoose · Jun 29, 2020

well you know the stock clad wheels are covers too. But platidip would work, just not be as glossy if thats what you are after.

PCA4208 · Jun 29, 2020

Yeah I like the matte look. The way I see it, $15 bucks on Plastidip and a few hours of work is easier than tracking down non-clad wheels, spending the money on the covers and getting a tire shop to swap the wheels. Plus if I don't like the Plasti-dip I can just peel it off lol.

PCA4208 · Jul 1, 2020

Installed the Dee Zee tailgate assist and liking it so far. Honestly the tailgate is very light compared to the 3rd gen so it would have been more useful on that truck lol. Good mod for 20ish dollars.

PCA4208 · Jul 6, 2020

Got refunded a deposit on an electric bill recently so decided to pick up the MevoTech UCA’s just for some added security when I install the Bilstein 5100’s. Painted them up tonight and hope to get it all installed on Saturday, Installing at 2.8”

Sent from my iPhone using Tapatalk

rwhjr · Jul 7, 2020

Haven’t people found the mevotechs to be no better than stock (ie the BJs are still in the same position/angle as stock) thus they’re not going to actually do anything OEM won’t do?

PCA4208 · Jul 7, 2020

I'm not installing them because they are so much better that stock. I'm mostly doing it because it gives a bit of added security to have a new ball joint that is grease-able and beefed up arm (forged steel vs stock stamped steel). I don't want to have to worry about the ball joint down the road. Also from some research I've seen the the Mevo's give a slightly better angle when added to a level vs stock where the ball joint doesn't seem to be too happy but will functionally work.

PCA4208 · Jul 11, 2020

Fixed my 3rd brake light seal. I pulled it off and half of it stuck to the truck. The actual deal might have been alright but I fixed it for added security. The new weatherstripping was really good quality. The leftover of it I’ll be using to fix the front bulkhead seal on my tonneau cover.

Sent from my iPhone using Tapatalk

PCA4208 · Jul 13, 2020

Finally got my level on. The having the right tools and a two post lift made quick work. The first front side took about 1.5 hours, the second side about 30 minutes. We installed Bilstein 5100’s at 2.8” on the front along with MevoTech UCA’s for added security. The rear is a 3/4” spacer meant for a XJ/TJ Jeep but it fit perfectly on the truck to bring it to almost exactly level. Gotta get an alignment this week but it drive straight all the way home. It rides a slight bit stiffer but still very smooth.
Measurements before were 36.25 front and 39.125 rear. After us 39.75 front and 40” ish rear so almost exactly level.

Sent from my iPhone using Tapatalk

Canadianguy · Jul 13, 2020

Looks good! I also see you installed the “stubby” antenna. How is it?
Just debating to do the same with mine!

PCA4208 · Jul 13, 2020

Canadianguy said:
Looks good! I also see you installed the “stubby” antenna. How is it?
Just debating to do the same with mine!

I installed the stubby because it looks great and also because I never use the radio lol. I pay for Spotify so I use that over bluetooth, or I use Sirius as I have a few months of free service. I tried FM once to see and it still sounded as good as FM radio can sound lol.

Canadianguy · Jul 13, 2020

Perfect. Thanks!

PCA4208 · Aug 6, 2020

Installed my new AJT shift knob. This thing is BEEFY. Definitely feels more like a shifter than a radio dial. I didn’t like the look of B&M or others.

Sent from my iPhone using Tapatalk

Rav3ncroft · Aug 6, 2020

PCA4208 said:
Installed my new AJT shift knob. This thing is BEEFY. Definitely feels more like a shifter than a radio dial. I didn’t like the look of B&M or others.

Sent from my iPhone using Tapatalk

Looking good. I think it's one of the best upgrades I've done.

TwinSuns · Aug 7, 2020

Looks great!

Big Cheddar · Aug 8, 2020

PCA4208 said:
Did my first mod tonight. Found a BAKFlip cover on FB market place for a steal, 250 cash. It’s a bit older but it’ll work for my needs. Have a tailgate assist and a stubby antenna coming in soon as well.

Sent from my iPhone using Tapatalk

Big Cheddar · Aug 8, 2020

Nice Truck !

PCA4208 · Aug 23, 2020

Facebook Marketplace continues to give treasures. Found an OEM sport grille for cheap, decided why not as I'm slowly doing away with the chrome on the truck. It has a few nicks here and there but otherwise great condition, not mounting tabs or anything broken.

PCA4208 · Jan 5, 2021

First mod of the new year. Found someone selling stock powder coated black rims from a sport or other model. Picked them up for Dailey cheap and got them mounted. They have a few nicks on them but nothing crazy. It’s the looks I’ve been searching for.

Sent from my iPhone using Tapatalk

Finally in a 4th Gen (Build Thread)

Indecisive Car Owner

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Member

Senior Member

Member

Senior Member

Senior Member

Member

Senior Member

Senior Member

Senior Member

Senior Member

Similar threads

Forum statistics

Share this page