upgraded 2013 ram 1500 to 7'' evic from 2014. followed big daddys house instructions. Got miles to work cant change engine or idle times. after reboot pannel flickers alfaobd says complete no changes. Using android Pixel 3xl alfaobd 2.1.9.2 with obdlink mx+. Any help is appreciated and thanks in advance.
sorry 2x click.....
I just had a very similar issue doing a VGT calibration for a buddy. Alfa said the procedure was complete but it never did anything. Only thing that worked for me was to unhook the batteries for a few minutes then try the procedure again.
You could also try the key in the acc and in run positions to see if there is any difference.
Unfortunately, you just are going to have to mess with it for now. Good news is that updates are pretty frequent so it might be an issue that is corrected eventually.
Edit: just remembered I also did this when having that issue, might help for you too.
Go to the alfa main page and go to the settings gear in the middle top of the page. Then scroll down to interface timeout and increase it to the max number 1000ms.