Best Mods for Under $100

JEFF TURLEY · Jul 25, 2020

I found a used bedrug for $80 and put on the $25 deezee tailgate assist. Might get a shorter antenna but wonder how it affects reception..

ISKRA · Jul 25, 2020

JEFF TURLEY said:
I found a used bedrug for $80 and put on the $25 deezee tailgate assist. Might get a shorter antenna but wonder how it affects reception..

I was very skeptical of a short antenna after taking a year of antenna theory in school, but I was pleasantly surprised with how well it worked. The lower range of FM had minimal distortion and no difference at the rest of the FM spectrum.

AntennaMastsRus - The Original 6 3/4 Inch is Compatible with Dodge Ram Truck 1500 (2009-2020) - Car Wash Proof Short Rubber Antenna - Internal Copper Coil - Premium Reception - German Engineered https://smile.amazon.com/dp/B01M6CAZKK/ref=cm_sw_r_cp_api_i_qb8gFbFGR1NAJ

RAM DRVR · Jul 25, 2020

JEFF TURLEY said:
.………... Might get a shorter antenna but wonder how it affects reception..

Just cut your OEM antenna down about 10" like a lot of us have. Still works good and doesn't wobble around at speed.

SitKneelBend · Jul 25, 2020

JEFF TURLEY said:
I found a used bedrug for $80 and put on the $25 deezee tailgate assist. Might get a shorter antenna but wonder how it affects reception..

It will lower reception. Depending on where you live it will vary on how much you no longer can tune into.

Sent from my HTC U11 using Tapatalk

Anonymous007 · Jul 25, 2020

Thanks to whoever shared the link to the steering wheel piece

Sent from my iPhone using Tapatalk

Anonymous007 · Jul 25, 2020

Sent from my iPhone using Tapatalk

Anonymous007 · Jul 25, 2020

Well under 100 [emoji16]

Sent from my iPhone using Tapatalk

RangerWeaver · Jul 26, 2020

I recently (almost a month now) purchased a new to me 2011 Ram 1500 Crew Cab SLT, after owning a few vehicles after having to say goodbye to my 1996 Ram 2500.
After reading all 241 pages I have a few new ideas and came to realize that this is an expensive thread.

I have already replaced the halogen H13 bulbs with Led replacements ($39.99).
Installed two (will be more) small amber led pods in the grill ($15.00)
Installed an Led floodlight behind the grill (free as I had it from my chevy), I do plan to add another.
Installed low profile stake pocket anchors in the two open pockets (free as I already owned them).
Mounted my CB antenna to the driver's side stake pocket behind the cab ($18.49 for the mount).

After replacing the passenger side headlight

I have planned

Cabin air filter
tailgate assist
Led floodlight pods for reverse lights
bed mat
Led bed lights

I also have a mod planned for this Wednesday that is over $100, as I am planning to replace the stock base radio with a touch screen radio with GPS and install a backup camera that replaces the tailgate handle all for $445

Anonymous007 · Jul 26, 2020

RangerWeaver said:
I recently (almost a month now) purchased a new to me 2011 Ram 1500 Crew Cab SLT, after owning a few vehicles after having to say goodbye to my 1996 Ram 2500.
After reading all 241 pages I have a few new ideas and came to realize that this is an expensive thread.

I have already replaced the halogen H13 bulbs with Led replacements ($39.99).

Installed two (will be more) small amber led pods in the grill ($15.00)

Installed an Led floodlight behind the grill (free as I had it from my chevy), I do plan to add another.

Installed low profile stake pocket anchors in the two open pockets (free as I already owned them).

Mounted my CB antenna to the driver's side stake pocket behind the cab ($18.49 for the mount).

After replacing the passenger side headlightView attachment 216765 View attachment 216766 View attachment 216767
I have planned

Cabin air filter

tailgate assist

Led floodlight pods for reverse lights

bed mat

Led bed lights

I also have a mod planned for this Wednesday that is over $100, as I am planning to replace the stock base radio with a touch screen radio with GPS and install a backup camera that replaces the tailgate handle all for $445

Keep updating!

Sent from my iPhone using Tapatalk

tnctx02 · Jul 26, 2020

Anonymous007 said:
Thanks to whoever shared the link to the steering wheel piece

Sent from my iPhone using Tapatalk

I missed this somewhere....where did you find the carbon fiber steering wheel trim bezel?

tnctx02 · Jul 26, 2020

W4RL0CK said:
Version 3 of this mod... Warlock Dash Badge Hopefully this is the last version.

View attachment 215081

Where did you get the emblem from? Are there other names avaiable?

W4RL0CK · Jul 27, 2020

tnctx02 said:
Where did you get the emblem from? Are there other names avaiable?

Nate at rebadge design... I sent him a pic idea and he made that badge. :cheers:

tnctx02 · Jul 27, 2020

W4RL0CK said:
Nate at rebadge design... I sent him a pic idea and he made that badge.

Very cool looking.
Would love a longhorn one

Anonymous007 · Jul 27, 2020

tnctx02 said:
I missed this somewhere....where did you find the carbon fiber steering wheel trim bezel?

Here you go. Super easy to install like others said

JSTOTRIM Carbon Fiber Steering Wheel Interior Cover Trim fit 2011-2018 Dodge RAM 1500 2500 3500 Accessories https://www.amazon.com/dp/B07Z8192S9/ref=cm_sw_r_cp_api_i_W1RhFbK5AP2MB

Sent from my iPhone using Tapatalk

NJMOPAR · Jul 27, 2020

Boscam K7 wireless backup camera for $95
View media item 29598

duckman631 · Jul 27, 2020

POINTMAN380 said:
Amazon. Standby for a link. I got the link from another member here. Super easy install and looks like it came from the factory

https://www.amazon.com/JSTOTRIM-Ste...4FQ5ZZ97ZAN&psc=1&refRID=GTCBQ3MK34FQ5ZZ97ZAN

Looks cool. I wish they made same in the satin finish that matches all my vents , console and radio bezels.

kad · Jul 27, 2020

Anonymous007 said:
Well under 100 [emoji16]

Sent from my iPhone using Tapatalk

I've been running a set of those for a few years. Make sure you squirt a little Fluid Film or similar into them to keep galvanic corrosion from fusing them onto the valve stems.

-K

Anonymous007 · Jul 27, 2020

kad said:
I've been running a set of those for a few years. Make sure you squirt a little Fluid Film or similar into them to keep galvanic corrosion from fusing them onto the valve stems.

-K

Thanks for the tip [emoji106]

Sent from my iPhone using Tapatalk

tnctx02 · Jul 27, 2020

Anyone know of a way to change the trim pieces colors? Would like to have mine a blue that matches the truck and not peel off.

NJMOPAR · Jul 27, 2020

tnctx02 said:
Anyone know of a way to change the trim pieces colors? Would like to have mine a blue that matches the truck and not peel off.

Go to carid.com and check out the Remin dash kits.
They have lots of colors & finishes. I have the African Zebrawood and it's top notch quality.

Best Mods for Under $100

Junior Member

Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Older and faster

Senior Member

Senior Member

Senior Member

Senior Member

Older and faster

Similar threads

Forum statistics

Share this page