Info gauge wont hold on selected setting

I have a 2014 3500. I keep the vehicle info gauge up 99% of the time. When I shut the truck off, no matter how long, it will go back to the select menu and when I select vehicle info it will go to tire pressure. Every time. 2 up pushes and I am back to where I want to be.....My question is can I change this somewhere in settings I have not gotten?

Kevin

KLook said:

I have a 2014 3500. I keep the vehicle info gauge up 99% of the time. When I shut the truck off, no matter how long, it will go back to the select menu and when I select vehicle info it will go to tire pressure. Every time. 2 up pushes and I am back to where I want to be.....My question is can I change this somewhere in settings I have not gotten?

Kevin

Click to expand...

No, unfortunately this is a problem some people experience. My 14 did the same thing until I upgraded from the 3.5" to 7" cluster. It seems to be a hit and miss thing and happens to both the 3.5" and 7" screen. For some reason the EVIC doesn't store it's last saved spot and automatically reverts back to the TPMS screen. So far the only fix I know of is to change your cluster and hope the new one holds the settings. Some have tried disconnecting the battery and also resetting the cluster but I don't think anyone has ever figured out a definite fix for it other than changing out the cluster. As long as you're TPMS is functioning correctly and you don't have any low pressure warnings it should stay on the screen it was on when the truck was turned off.

Sent from my SM-G981U1 using Tapatalk

Thanks! In addition to that my cruise control refused to turn on this afternoon, first time for that....wiring harness?

Kevin

KLook said:

Thanks! In addition to that my cruise control refused to turn on this afternoon, first time for that....wiring harness?

Kevin

Click to expand...

The cruise control button is a common problem with the 4th gen Ram. There are several posts about on the forum. There is also a TSB on it. If you're truck is still under warranty I reccomend taking it to the dealer to have it looked at. If not the switch is around $60 or $70 to replace yourself. Some people have also had luck just cleaning the contacts. You will need to remove your airbag to replace or service the switch.

Sent from my SM-G960U using Tapatalk

Thanks, back to working today, but who knows? I am handy and will take a stab at it if it goes out.

Kevin

Mine did this after making cluster changes in alfaobd (I added the radio settings menu). I removed the setting and everything went back to working as it should.

I am thinking someone has been into the settings via obd. I should be getting low pressure warnings because I only run 50 lbs in all 4 tires. May have to get a tuner or whatever to access the obd and check things out.
Any recommendations?


Kevin