Suspension Superstore 272920

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Matt Franklin

Senior Member
Joined
Oct 22, 2020
Posts
112
Reaction score
43
Location
Lexington, KY
Ram Year
2019
Engine
Hemi 5.7
Morning. I've been casually toying with the idea of leveling my '19 Classic Crew Cab 2WD 6'4" bed Ram. I've never lowered anything I've owned, so this is new territory for me. I want it to be a subtle change, and I definitely want the ride quality exactly as it is now.

I found a set of these on FB about 1/2 price:
2009-2018 RAM 1500 2wd/4wd Premium 2" Rear Lowering Coils - 272920 - Accessory Partners (suspensionsuperstore.com)

Has anybody used them? Any opinions or thoughts would be welcome.
 

Midnight Storm

One Badass Ram
Joined
Apr 27, 2019
Posts
1,184
Reaction score
1,249
Location
Victoria, B.C Canada
Ram Year
2016
Engine
Hemi 5.7
Morning. I've been casually toying with the idea of leveling my '19 Classic Crew Cab 2WD 6'4" bed Ram. I've never lowered anything I've owned, so this is new territory for me. I want it to be a subtle change, and I definitely want the ride quality exactly as it is now.

I found a set of these on FB about 1/2 price:
2009-2018 RAM 1500 2wd/4wd Premium 2" Rear Lowering Coils - 272920 - Accessory Partners (suspensionsuperstore.com)

Has anybody used them? Any opinions or thoughts would be welcome.
You may see a pretty sweet review on there from my beast. There are 3 pics from different angles. I like them!
I’m going to go lower at some point.
 

FamilyWagon

Member
Joined
Jan 20, 2021
Posts
75
Reaction score
114
Location
NoVA
Ram Year
16
Engine
5.7
Yay. First post here. Just had these springs installed on my 16 Ram crew cab 4x4.
Made it nice and level. Rides same as stock. Absolutely no complaints. Looks perfect.
 

Valkyrie0002

Member
Joined
Apr 1, 2019
Posts
32
Reaction score
20
Location
Fredericksburg, Va
Ram Year
2017 Big Horn CC
Engine
5.7
I installed these almost 2 yrs ago, rides like stock. Only complaint is they bottom out easily. I cut the bump stops down about an inch. I installed a fiberglass cap a yr ago and the ride height still looks level. I have a set of Firestone in-spring bags I will be installing.
 

18GSMRam

Senior Member
Joined
Mar 1, 2021
Posts
115
Reaction score
80
Location
FL
Ram Year
2018
Engine
5.7
Those of you that installed these, what is the gap from bottom of fender opening to top of the wheel?

I bought a used 2018 and it surprisingly has no rake to it but I cant find any indication of aftermarket parts (either front spacers or rear lowering springs).
 
OP
OP
M

Matt Franklin

Senior Member
Joined
Oct 22, 2020
Posts
112
Reaction score
43
Location
Lexington, KY
Ram Year
2019
Engine
Hemi 5.7
Those of you that installed these, what is the gap from bottom of fender opening to top of the wheel?

I bought a used 2018 and it surprisingly has no rake to it but I cant find any indication of aftermarket parts (either front spacers or rear lowering springs).
I didn’t wind up pulling the trigger on these, so I don’t have numbers for you. I wonder if your PO cut the stock springs?
 

18GSMRam

Senior Member
Joined
Mar 1, 2021
Posts
115
Reaction score
80
Location
FL
Ram Year
2018
Engine
5.7
I didn’t wind up pulling the trigger on these, so I don’t have numbers for you. I wonder if your PO cut the stock springs?

thanks for the response.... Tough to tell but I did some reading and some have indicated the 4x4's sit higher in the front by as much as an inch or 2 so that could be it if true. The back looks like all other trucks I have seen stock, its the front that is considerably higher then the ones I have seen out in parking lots but I didn't check to see if they were 4x4.
 
Top