John-Dennis
Junior Member
If a FOBIK has been stolen, how can you deactivate it?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Hi all,
still working on getting my damaged Ram back on the road… I thought I was nearly there with the work, but found a hidden damage on the casting of the EPS steering rack, which means it needs total replacement.
I have ordered a rack from a supplier in Europe but I am wondering about how to code it to the car once it’s been fitted?
can I use AlfaOBD to do this? I have been searching in the forum without success.
if it’s not possible with Alfa, is there a reasonably priced scan tool that you guys recommend that can recode the new rack?
thanks in advance,
So I'm probably beating a dead horse here. I've scrolled on a few pages here out of the 1388 pages and I'm still at a loss. I've researched and watched videos, went through the app trying to figure out what's going on and still lost. I'm sure MANY people have had the same issues and got them resolved and I'm hoping someone can either point me in the right direction or help me out. I've got a 2015 ram 1500 tradesman 5.7l hemi. Changed all bulbs to LED's. Brake lights LUMINATE when I hit the brakes but the "running" lights won't come on. Had resistors connected but since removed them. Had the hyper blink going for a while with the light out message, but once I changed to the LED option in the app, that all went away. How do I get BOTH to work? The brake running lights along with the turn signal lights? Reverse lights work fine. My headlights work everyone in a while. When they go out, they flash on and off 2-3 times and then stay off. That is completely random. If anyone has the quick fix and don't mind beating a dead horse with me, I would greatly appreciate it!...
Were you able to find your answers? There are other threads here specific to adding RKE. There is some hardware that needs to be updated and some wiring that likely needs to be added. There are a lot of variances between different years and trim levels, but essentially, what's required is: hood latch with switch (may already be installed), wiring from hood latch to Power Distribution Center (PDC) (wiring may already be installed), wiring from PDC to Body Control Module (BCM) (wiring may already be installed), new Radio Frequency Hub (RF Hub or RFH) (RFH may already be installed). There are kits on Amazon that contain all the hardware and wiring, but there are more cost effective ways to get it all. After all of that is good to go, you need the 4 button FOBIKS (can buy 4 button overlays on Amazon to use with your existing FOBIKS), you'll program the new FOBIKS using AlphOBD, then change the appropriate settings.I own a 2013 tradesman and am looking for a way to activate the keyless entry for it. Has anyone does this yet with AlfaOBD? Dealer says it is just a sales code they could add to activate it, so I decided to ask here first. Thanks in advance for any help
I cant figure out why I can get my turns to operate as drl. I thought I changed everything in Alfa so can anyone tell me what I have done wrong?
CBC Config I/O:
Right Dedicated DRL Lamp/Right Signature LED Present/Right Front Turn Signal #2/Headlamp Leveling Output Present: Yes
Left Dedicated DRL Lamps/ Left Front Turn Signal #2/Left Signature LED Present : Yes
CBC Features:
DRL Configuration: Optional DRL
DRL Lamp Location: Dedicated
DRL Dropout Enabled: Yes
LED Dedicated DRL Present: Yes
- Note: I have factory Projector headlights with LED turns
ECUConfig3:
DRL Customer Setting Option Present: Yes
Cust.Prog.Features:
Daytime Running Lamps: Enabled
Cust.Set.Menu 1:
Daytime running lights CSM Present: Yes
I have quads maybe I will wait until I make the swap.I have a 2014 and I've had mine set for a couple of years. Here's all the related settings on mine:
Code:CBC Config I/O: Right Dedicated DRL Lamp/Right Signature LED Present/Right Front Turn Signal #2/Headlamp Leveling Output Present: Yes Left Dedicated DRL Lamps/ Left Front Turn Signal #2/Left Signature LED Present : Yes CBC Features: DRL Configuration: Optional DRL DRL Lamp Location: Dedicated DRL Dropout Enabled: Yes LED Dedicated DRL Present: Yes - Note: I have factory Projector headlights with LED turns ECUConfig3: DRL Customer Setting Option Present: Yes Cust.Prog.Features: Daytime Running Lamps: Enabled Cust.Set.Menu 1: Daytime running lights CSM Present: Yes
-K
I have quads maybe I will wait until I make the swap.
Not as DRLs, no. Daytime Running Lights are always in the headlight area, by DOT regulation.Can the power side mirror turning lights be used as DLR?
I own a 2013 tradesman and am looking for a way to activate the keyless entry for it. Has anyone does this yet with AlfaOBD? Dealer says it is just a sales code they could add to activate it, so I decided to ask here first. Thanks in advance for any help
52 US gallons to Liters should be 196.8 or 197 rounded up.Okay guys I'm getting my bypass cable and my obd MX+ sometime soon and I want to do this one at a time, so I install a 52 gals Titan fuel in my 3500 and I want to see if I can use my setup to change it to read 52 gals, now I believe I change that to 194 liters, is this correct?
Please post if it works for you! I tried to change it on my 2018 and successfully made the change, however the fuel gauge did not read correctly so I changed the value back to the stock setting.Okay guys I'm getting my bypass cable and my obd MX+ sometime soon and I want to do this one at a time, so I install a 52 gals Titan fuel in my 3500 and I want to see if I can use my setup to change it to read 52 gals, now I believe I change that to 194 liters, is this correct?
Please post if it works for you! I tried to change it on my 2018 and successfully made the change, however the fuel gauge did not read correctly so I changed the value back to the stock setting.