Help! OEM Foglights 2021 Warlock

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

ntmd8r03

Junior Member
Joined
Aug 15, 2021
Posts
6
Reaction score
3
Location
Colorado Springs
Ram Year
2021
Engine
5.7
This week I installed OEM Foglights (part# 68466268AB) the Fog Light Jumper Harnesses 68154309AA and 68197065AA do not work with the foglights for a Warlock the connectors are for halogeon bulbs and part number 68466268AB are LED. With the help of the parts guy at my local dealer we tracked down part number 68271557AA. Part number 68271557AA is listed as Front Fascia Wiring. The diagram does not properly depict the part as the diagram depicts a harness with connectors for parking sensors, but the actual part does not. I purchased the Foglight Extension Harness from M2 Mods, and wired it up per the instructions (easy enough to follow). I made the correct changes with alfaODB, CBC Config I/O-Connector A Pin 01 and Connector D Pin 13: Front Fog Lamps Output Present -yes, CBC Features-Front Fog Lamp Dropout Enabled - yes, and I set CBC Features-LED Front Fog Lamps Present - yes. The fog lights do not turn on. I get the indicator on the dash that they should be on, I have checked the voltage at the connectors and I have 13+ volts at the connector. Is there something that I am missing with the factor LED lights? The Hi-beam dropout works as it should. Any help is appreciated.

 

crash68

ACME product engineer
Staff member
Administrator
Supporting Member
Joined
Mar 20, 2016
Posts
10,704
Reaction score
16,709
Ram Year
2015
Engine
3.0 EcoDiesel
try turning the truck ignition on but don't start the truck and see if the fog lights work. If there is a problem with the bulb out detection, this should bypass it.
 
OP
OP
N

ntmd8r03

Junior Member
Joined
Aug 15, 2021
Posts
6
Reaction score
3
Location
Colorado Springs
Ram Year
2021
Engine
5.7
try turning the truck ignition on but don't start the truck and see if the fog lights work. If there is a problem with the bulb out detection, this should bypass it.
Just tried it, no change. Thanks though.
 

michaelw31

Junior Member
Joined
Oct 26, 2021
Posts
5
Reaction score
0
Location
NJ
Ram Year
2021
Engine
3.6L
How do you actually install the lights themselves? Did you remove the lower bumper or did you work your way through the wheel well?

I removed the grill and saw what appeared to be mounting brackets behind the bumper but I had no way of getting in there. It seems to me installing the lights will be more daunting than wiring them.
 

Mb7640

Senior Member
Military
Joined
Dec 14, 2021
Posts
450
Reaction score
396
Location
Fountian hills az
Ram Year
2021
Engine
5.7
How do you actually install the lights themselves? Did you remove the lower bumper or did you work your way through the wheel well?

I removed the grill and saw what appeared to be mounting brackets behind the bumper but I had no way of getting in there. It seems to me installing the lights will be more daunting than wiring them.
I just installed mine. Yes you have to remove the bumper but it's very easy. I did it by myself here are some pics
 

Attachments

  • 20220115_131919.jpg
    20220115_131919.jpg
    100.2 KB · Views: 51
  • 20220115_131910.jpg
    20220115_131910.jpg
    100.1 KB · Views: 47
  • 20220115_132831.jpg
    20220115_132831.jpg
    132.7 KB · Views: 54
  • 20220115_132828.jpg
    20220115_132828.jpg
    138.5 KB · Views: 45
  • 20220115_131924.jpg
    20220115_131924.jpg
    118.5 KB · Views: 48
  • 20220115_141643.jpg
    20220115_141643.jpg
    82.7 KB · Views: 50

jeanbacan

Junior Member
Joined
Jan 18, 2022
Posts
12
Reaction score
2
Location
Alberta, CA
Ram Year
2021
Engine
V8
@ntmd8r03 Hey, have you found the correct jumper wire for led fog lights 68466268AB? It seems 68271557AA would not fit them as @Mb7640 mentioned. I mean, imagining such a wiring exists to connect to m2 harness. Im not willing to replace the connectors as Im very beginning in changing anything on the car so I dont have the experience. What I could do is order 68271557AA and then use an amazon cheap led to replace the bulbs.
 
Last edited:

Hydra21Warlk158

Junior Member
Joined
Jul 27, 2022
Posts
3
Reaction score
0
Location
Pennsylvania
Ram Year
2021
Engine
5.7 Hemi
I have 2021 Warlock that didn’t come with Fog lights. Got all the OEM parts necessary and installed then but, can’t find the connection from body to make them work. Do I need another part? Does anyone have a pic?
 

Mb7640

Senior Member
Military
Joined
Dec 14, 2021
Posts
450
Reaction score
396
Location
Fountian hills az
Ram Year
2021
Engine
5.7
I used a auxbeam switch panel for mine and I use it for my light bar
 

Jaketeady

Junior Member
Joined
Oct 17, 2023
Posts
1
Reaction score
0
Location
Canada
Ram Year
2021
Engine
5.7
This week I installed OEM Foglights (part# 68466268AB) the Fog Light Jumper Harnesses 68154309AA and 68197065AA do not work with the foglights for a Warlock the connectors are for halogeon bulbs and part number 68466268AB are LED. With the help of the parts guy at my local dealer we tracked down part number 68271557AA. Part number 68271557AA is listed as Front Fascia Wiring. The diagram does not properly depict the part as the diagram depicts a harness with connectors for parking sensors, but the actual part does not. I purchased the Foglight Extension Harness from M2 Mods, and wired it up per the instructions (easy enough to follow). I made the correct changes with alfaODB, CBC Config I/O-Connector A Pin 01 and Connector D Pin 13: Front Fog Lamps Output Present -yes, CBC Features-Front Fog Lamp Dropout Enabled - yes, and I set CBC Features-LED Front Fog Lamps Present - yes. The fog lights do not turn on. I get the indicator on the dash that they should be on, I have checked the voltage at the connectors and I have 13+ volts at the connector. Is there something that I am missing with the factor LED lights? The Hi-beam dropout works as it should. Any help is appreciated.

Hey
Will you sent me where did you buy your fog light I have 2021 ram warlock please and thank you and what is the parts do I need and also if you have a video how to install it so much helpful thank you
 

RamDiver

Senior Member
Joined
Jan 23, 2022
Posts
1,941
Reaction score
3,079
Location
Marlborough, Ontario, Canada
Ram Year
2021
Engine
Hemi 5.7
Hey
Will you sent me where did you buy your fog light I have 2021 ram warlock please and thank you and what is the parts do I need and also if you have a video how to install it so much helpful thank you

FYI, the OP'er hasn't been online in about 9 months.

Screenshot_20231017-020650_Vivaldi Browser.jpg

.
 
Top