ramtrucks
Junior Member
- Joined
- Jul 16, 2013
- Posts
- 4
- Reaction score
- 0
- Ram Year
- 2013
- Engine
- 5.7 Hemi
Happy holidays to everyone. I recently removed the tail lights on my Ram to inspect the area inside the fender where rust generally starts to form in between the panels. I had to remove several small rocks (rather difficult BTW) that we’re lodged in there. On my last truck, I had a rock get stuck in there and eventually pushed a small bump out on the outer fender. Basically a reverse dent. Any ideas on what I could put in this area behind the fender to keep small rocks and sand out?