truck wont start after replacing radio

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

shutts

Junior Member
Joined
Dec 23, 2021
Posts
2
Reaction score
0
Location
Miami
Ram Year
2018
Engine
v6 3.6
2018 Ram, radio was being replace. Battery was not disconnected. While new radio wires was being plugged in there was soft clicking sounds and truck went in a mode to where it shut down. I replaced battery. Key fob stuck on ACC and will not release. Interior lights work and cluster board shows Key in ignition and mileage. -40 shows for temp and that's all. doors will lock and unlock and everything else is dead. I don't know what else to try? I put original radio back in as well. Any help would be grateful, thank you!
 

ric221

Senior Member
Joined
Nov 18, 2013
Posts
156
Reaction score
81
Ram Year
2016
Engine
5.7L Hemi
Check to see if you have any blown fuses. Also check the voltage of your battery.
 
Top