Lifted 4th Gen Pics - Show Em Off!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

lokes_treachery

Junior Member
Joined
Nov 24, 2021
Posts
8
Reaction score
33
Location
Canada
Ram Year
2021
Engine
5.7 L HEMI
Thanks! I love this truck.
Wow looking dialed in! I just ordered a Rambar as well for my Classic Tradesman. Did you have to modify much to make yours fit nicely? Asking since the Rambar isn't supposed to fit a 1500 Classic...
 

j-b

Senior Member
TOTM Winner
Joined
Jul 29, 2012
Posts
300
Reaction score
408
Location
Kansas City
Ram Year
2019
Engine
5.7 Hemi
Wow looking dialed in! I just ordered a Rambar as well for my Classic Tradesman. Did you have to modify much to make yours fit nicely? Asking since the Rambar isn't supposed to fit a 1500 Classic...


Thanks! I appreciate that. So I'm not sure how many different models of Rambar are out there. I know when I looked up the install instructions it looked a little different than this one. Mine came off a TRX from the factory.


I had to cut off some welded washers on the underside and some of the tab on the inner bed mounting bracket.

IMG_9648.jpg

I also had to make some adjustments to the top bars to get the width right.

IMG_9649.jpg


But as long as you have a cut off wheel, install should be a breeze.
 

healthyrx

Senior Member
TOTM Winner
Joined
Nov 29, 2021
Posts
371
Reaction score
552
Location
Oviedo FL
Ram Year
2017 1500 Sport Night
Engine
5.7 Hemi
Lift is finally "done"
- Eibach pro truck lift with rings at 2nd slot
- RC 1/2" top plate spacers in the front
- Zone UCAs
- 315/70r17 cooper discoverer st maxx
- 17x9 procomp 32 wheels with -6mm offset
- lug nuts and 77.8 to 108 mm hub centric rings

I have a zone 1.5" body lift I may still be installing at some point when I can get a long weekend I dont need to drive since this is my only vehicle

After the lift was installed I was on stock tires for about a week and fender measurements on stock tires were ~36/40 inches F/R before and 39.5/41.5 F/R after. Havent measured with new tires on yet

Note- front wheel is slightly turned from backing in so it may look "off" in the pics

IMG_6149.jpgIMG_6151.jpg

Bone Stock
IMG_5940.jpg

Lifted on stock tires/wheels
IMG_6101.jpg
 
Last edited:

Quick_Shifter

IG: @ak_trucks_pa
Supporting Member
TOTY Winner
TOTM Winner
Joined
Aug 14, 2018
Posts
4,161
Reaction score
3,776
Location
ASTON,PA
Ram Year
2012
Engine
AK Trucks Tuned 5.7
Lift is finally "done"
- Eibach pro truck lift with rings at 2nd slot
- RC 1/2" top plate spacers in the front
- Zone UCAs
- 315/70r17 cooper discoverer st maxx
- 17x9 procomp 32 wheels with -6mm offset
- lug nuts and 77.8 to 108 mm hub centric rings

I have a zone 1.5" body lift I may still be installing at some point when I can get a long weekend I dont need to drive since this is my only vehicle

After the lift was installed I was on stock tires for about a week and fender measurements on stock tires were ~36/40 inches F/R before and 39.5/41.5 F/R after. Havent measured with new tires on yet

Note- front wheel is slightly turned from backing in so it may look "off" in the pics

View attachment 481642View attachment 481643

Bone Stock
View attachment 481647

Lifted on stock tires/wheels
View attachment 481648
Awesome Job!!!!! Truck looks GREAT
 

j-b

Senior Member
TOTM Winner
Joined
Jul 29, 2012
Posts
300
Reaction score
408
Location
Kansas City
Ram Year
2019
Engine
5.7 Hemi
Lift is finally "done"
- Eibach pro truck lift with rings at 2nd slot
- RC 1/2" top plate spacers in the front
- Zone UCAs
- 315/70r17 cooper discoverer st maxx
- 17x9 procomp 32 wheels with -6mm offset
- lug nuts and 77.8 to 108 mm hub centric rings

I have a zone 1.5" body lift I may still be installing at some point when I can get a long weekend I dont need to drive since this is my only vehicle

After the lift was installed I was on stock tires for about a week and fender measurements on stock tires were ~36/40 inches F/R before and 39.5/41.5 F/R after. Havent measured with new tires on yet

Note- front wheel is slightly turned from backing in so it may look "off" in the pics

View attachment 481642View attachment 481643

Bone Stock
View attachment 481647

Lifted on stock tires/wheels
View attachment 481648
That looks really good!
 

64on37s

Junior Member
Joined
Jan 19, 2022
Posts
7
Reaction score
9
Location
Oregon
Ram Year
2016
Engine
6.4
2016 2500 6.4 4x4 with 4.10 gears on a 5 1/2” BDS Radius arm lift with fox shocks. Full Badge and chrome delete, 10 % tint front and over factory rear windows, 50% full windshield tint with 5% curved brow. 6500k HID headlights and full LED swap throughout. Moto metal M0970 20x10 -24 wheels currently wrapped in a 37/13.50 Maxxis Razr MT, K&N CAI, magnaflow muffler with resonator delete and dumped 5” tip kept high and tight so it’s unseen at rear axle.
 

Attachments

  • 46D628F8-B477-4218-8A27-9548B75AA8BB.jpeg
    46D628F8-B477-4218-8A27-9548B75AA8BB.jpeg
    89.6 KB · Views: 48
  • 00088FAA-862D-4B50-A8B7-81EA59F7D4C3.jpeg
    00088FAA-862D-4B50-A8B7-81EA59F7D4C3.jpeg
    190.9 KB · Views: 47
  • 2674992C-9147-4E92-9A5C-50780410DBF0.jpeg
    2674992C-9147-4E92-9A5C-50780410DBF0.jpeg
    113.8 KB · Views: 44
  • DB8191D6-C0B4-4654-8759-5160C9CF5482.jpeg
    DB8191D6-C0B4-4654-8759-5160C9CF5482.jpeg
    196.8 KB · Views: 54
  • 4240105C-ECF7-4982-BE83-A895109713A0.jpeg
    4240105C-ECF7-4982-BE83-A895109713A0.jpeg
    250.2 KB · Views: 55
  • 78756826-3D42-47D2-9038-12FCDFCAB0A3.jpeg
    78756826-3D42-47D2-9038-12FCDFCAB0A3.jpeg
    219.9 KB · Views: 57
  • B0AA9644-9591-4995-B178-9C557FB1E2D0.jpeg
    B0AA9644-9591-4995-B178-9C557FB1E2D0.jpeg
    82.2 KB · Views: 51
Top