Can someone resolve my issue?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

imwaahoo

Junior Member
Joined
May 27, 2020
Posts
28
Reaction score
13
Location
Saline
Ram Year
Mi
Engine
5.7 Hemi
Looking for a how to on the following.
I bought a 2014 Chrysler Town And Country that was a fresh water flood vehicle. After going through it it was determined that the engine 3.6L was Hydro locked.
Purchased a 2016 caravan engine 3.6L with 38K miles on it out of Texas... I'm in Mi. Had it shipped up, works great after install with no problems other than the following.
I need the Vin # from the 2016 3.6 purchased and shipped from Texas. The seller "American Auto Export out of Huston" will not track their records to locate the title (for the Vin info.) for whatever reason...To time consuming, No help, Vehicle destroyed Etc.
Does anyone know how I can trace the engine serial # to the vehicle vin? I need this information to get the van inspected in Michigan allowing for a rebuilt title.
I always had great success from folks on the forum and I know it's not a ram...but still a Chrysler so looking to see if anyone here can help me out.
Thanks in advance. Dan
[email protected]
 

16Ram4x4

Senior Member
Joined
Jan 20, 2019
Posts
265
Reaction score
352
Location
Missouri
Ram Year
2016
Engine
5.7 Hemi
Look on the front of the engine block. There should be an area with the vin number from that vehicle on there.
Look at your vin and then look for a similar number
 
Top