Looking for recommendations; intake and motor mounts.

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Joined
Dec 13, 2020
Posts
31
Reaction score
12
Location
Richmond
Ram Year
2006
Engine
5.7 hemi
I’m getting a reman engine Installed in my 06 Dodge Ram 1500 5.7 hemi 4wd. I’m looking on the parts sites and can’t figure out the correct motor mounts, any ideas? Also need a recommendation on an intake for the same engine. Any help is appreciated!
 

LoneWolf3574

Senior Member
Military
Joined
Apr 23, 2018
Posts
393
Reaction score
173
Location
Arizona
Ram Year
2006
Engine
Hemi 5.7
The parts manual has the below numbers as the factory part numbers for all 4WD 5.7L V-8 engine mounts (INSULATOR, Engine MountFront Right/Left). Usually, each of the aftermarket manufacturers has some sort of an interchange catalog, unless you really want OEM, then you're looking at north of $600 for the pair.

55366660AD - Right
55366661AC - Left

Pressing out the inserts is another option and much cheaper, but I have read that is a major hassle to press the new inserts in.

I use MoparPartsGiant to at least figure out if the part is compatible with my truck and I don't have the parts manual handy, they're dead on most of the time.
 

HemiLonestar

Senior Member
Military
Joined
Jun 1, 2012
Posts
5,991
Reaction score
2,952
Location
MD
Ram Year
2016
Engine
5.7 hemi
Intake as in manifold or intake as in filter/inlet?
 

Brando_SLT

Senior Member
Joined
Nov 8, 2018
Posts
237
Reaction score
105
Location
Orange County, CA
Ram Year
2005
Engine
Hemi 5.7
Pressing out the inserts is another option and much cheaper, but I have read that is a major hassle to press the new inserts in.
Don't do this... You will hate yourself. Just get the complete isolator/motor mount. You have to pull the whole thing either way, might as well just replace them. Also, get the transmission mounts.
 
Top