Alpha Rex DRL’s

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

NLghost

Junior Member
Joined
Sep 27, 2021
Posts
6
Reaction score
0
Location
Newfoundland and Labrador
Ram Year
2014
Engine
5.7 HEMI
Hi folks,
This is my first post here.
I put Alpha Rex pro series in my ‘14 Ram 1500 that had projectors in it originally. Wired everything as per the instructions and everything worked perfectly until I used my sunroof, (which is the same fuse they recommended to tap into for the DRL’s) and cooked the harness they provided to run the DRL’s. Anyway, my question is, using alfaOBD can I skip using that harness? And if so what changes do I need to make in the body computer to enable them to work the way they should?
 

hunterdan

Senior Member
Joined
May 7, 2018
Posts
844
Reaction score
781
Location
SE PA
Ram Year
2019 classic
Engine
5.7 Hemi
To use the oem drl function, you'd need to isolate the wire from the oem plug from the alpharex harness and run it to the little bullet connector in the alpharex headlights I believe. Or, you can relocate the fuse tap to the cigarette lighter plug and call it a day. It sounds like you may have had the fuses in the wrong position on the fuse tap (you did use a fuse tap, right? )
 
OP
OP
N

NLghost

Junior Member
Joined
Sep 27, 2021
Posts
6
Reaction score
0
Location
Newfoundland and Labrador
Ram Year
2014
Engine
5.7 HEMI
Thanks for the reply. And no I didn't have a fuse tap at the time and it was only recommended in the instructions. A momentary lapse of judgment on my part. Any idea which pin in the OEM harness is the one for the DRLs?
 

hunterdan

Senior Member
Joined
May 7, 2018
Posts
844
Reaction score
781
Location
SE PA
Ram Year
2019 classic
Engine
5.7 Hemi
Not sure if this will help or not. Scroll down and click on headlights projector wiring
 

crash68

ACME product engineer
Staff member
Administrator
Supporting Member
Joined
Mar 20, 2016
Posts
10,771
Reaction score
16,888
Ram Year
2015
Engine
3.0 EcoDiesel
@NLghost if you originally OEM projectors in the truck, the harness that adapts the Alpharex headlights has a wire for the DRLs. The OEM projector wiring has the dedicated DRL circuit which can be enabled with AlfaOBD.
 

crash68

ACME product engineer
Staff member
Administrator
Supporting Member
Joined
Mar 20, 2016
Posts
10,771
Reaction score
16,888
Ram Year
2015
Engine
3.0 EcoDiesel
@NLghost once you have the DRLs wired to the to the truck dedicated DRL circuits, they work like factory programming.
You don't use the DRL module that was included with the headlights.
For how to set up the Dedicated DRLs, read through the first post of the AlfaOBD thread: https://www.ramforum.com/threads/alfaobd.123982/
Be sure to click on the "Known Working List"
 

Sarum

Junior Member
Joined
Jun 7, 2017
Posts
3
Reaction score
2
Location
Ontario
Ram Year
2017 Ram 1500 limited
Engine
Ecodiesel 3.0L
Same situation and product, but Mine did not come with stock projectors,. It uses low voltage high beams for DRL, any idea how to find a dedicated wire for drl, without going the route of connecting to sunroof circuit?

Making it as stock as possible? Like with factory projection headlamps
 

Mike Townsend

Senior Member
Joined
Apr 13, 2018
Posts
245
Reaction score
275
Location
75160
Ram Year
2014
Engine
5.7
I have been trying to figure out the same thing. I have the luxx series and am having problems with DRL's. When I had DRL turned on with AlphaODB it was using my turn signals for it. So the uppoer LED bar was white and the bottom was yellow. Are you saying I should get rid of the adapter that plugs into the battery and the DRL adapter?
 

crash68

ACME product engineer
Staff member
Administrator
Supporting Member
Joined
Mar 20, 2016
Posts
10,771
Reaction score
16,888
Ram Year
2015
Engine
3.0 EcoDiesel
any idea how to find a dedicated wire for drl, without going the route of connecting to sunroof circuit?

Making it as stock as possible?

I have been trying to figure out the same thing.
Check out this thread, I basically walked this guy through what to look for and how to add the factory DRL circuits to a truck that is equipped with Quads
 
Top