Birchmore213
Junior Member
I recently installed a 4 inch lift on my 19 classic. And I am having issues getting the track bar (panhard bar) to line back up properly. Does anyone have any experience with this and how did you fix it? Please help me!!
Track bar
- Thread starter Birchmore213
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Just force it back into place with both wheels off the ground.
olyelr
Senior Member
I have used a ratchet strap in the past to pull the axle one way or the other.
olyelr
Senior Member
Even if it is adjusted to the correct length (if its adjustable) chances are it still isnt going to just “line up”. It will take some effort.
- Joined
- Aug 14, 2018
- Posts
- 4,188
- Reaction score
- 3,854
- Location
- ASTON,PA
- Ram Year
- 2012
- Engine
- AK Trucks Tuned 5.7
While the truck is on the ground have a helper lean on the rear bumper the the direction you need to go. It doesn’t take much force.
BolletuH
Member
This is easily the best method if you're by yourself. Especially if your trackbar is off by quite a bit.
Similar threads
Staff online
-
mikeruSuper Moderator
Members online
- BeavertonMike
- CS911RSPNDR
- RamCares
- Brandon-w
- Andre67
- jason1
- Breck724
- Choicebro
- aszumilo
- Ramfanski
- Daw14
- tnctx02
- RAM DRVR
- SitKneelBend
- StateOfMind
- polarcap226
- hunterdan
- dsherman26
- Travis8352
- RamElliot
- Team Horner
- Bmags
- jeff_rey
- Marshall
- sigfla
- guntisp
- TGoedde
- trowe1991
- xhadrien
- JW2 Innovations
- Mfalty24
- Rlaman
- CanuckRam1313
- jejb
- BDHPlayer
- g00fy
- Md1212
- marine0311
- ImNickJames
- Alaskan3500
- VegasDragger45
- popcenator
- 1stindoor
- Jerryrholden
- enuser
- olyelr
- BDWheeler13
- Lsujker
- runamuck
- mikeru