4" Zone lift with Fox 2.0 coilovers and shocks

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

ChaseH878

Junior Member
Joined
May 25, 2022
Posts
2
Reaction score
3
Location
Virginia Beach
Ram Year
2015
Engine
Hemi 5.7
Good Day All,

I have a 2015 1500 4x4 and I am wanting to put a 4 inch lift on it. I'm pretty set on the 4" inch Zone kit and would like to add the Fox 2.0 performance series coil overs and shocks but I notice that they will only work for a 0-2" lift. Any advice on how to achieve this setup would be greatly appreciated.
 

RJL1

Senior Member
Joined
Dec 6, 2014
Posts
443
Reaction score
519
Location
Jersey Shore-By the beach
Ram Year
2018
Engine
5.7 Hemi
Welcome to the forum.

There's TONS of talk about this exact topic. I was set on getting a 4" system as well but went with the Zone 6" with the front set at 5" and rear 3" springs. Fox 2.5 coil overs in front and Fox 2.0's in the rear. Also the Zone UCA's.

I researched this relentlessly and this was the system that worked for me. My truck drives like a dream and looks fantastic.

I suggest you take a few days and do some research here. This forum is a fantastic resource with tons of outstanding members that are very helpful.
 

crazykid1994

Senior Member
Joined
Sep 21, 2013
Posts
5,040
Reaction score
4,963
Location
Florida
Ram Year
2017
Engine
Hemi 5.7
The 4” lift with the fox 2.0 will be fine. The reason it says for 2” lift is because the coilover lifts you 2”. It can be used with the lift. You will still need to use the front 4” strut spacer included in the kit but you will then have 6” of lift in the front.
 

atreides

Senior Member
Joined
Dec 13, 2021
Posts
125
Reaction score
82
Location
USA
Ram Year
2016
Engine
5.7
The 4” lift with the fox 2.0 will be fine. The reason it says for 2” lift is because the coilover lifts you 2”. It can be used with the lift. You will still need to use the front 4” strut spacer included in the kit but you will then have 6” of lift in the front.
Would using the 2.0s with a Zone 6'' lift require setting the coilovers to 2'' of lift and adding the 4'' strut spacer on top? So the 2'' preload spacer from the Zone kit isn't necessary at all?
 

crazykid1994

Senior Member
Joined
Sep 21, 2013
Posts
5,040
Reaction score
4,963
Location
Florida
Ram Year
2017
Engine
Hemi 5.7
Would using the 2.0s with a Zone 6'' lift require setting the coilovers to 2'' of lift and adding the 4'' strut spacer on top? So the 2'' preload spacer from the Zone kit isn't necessary at all?
Correct. And actually it’s a 5” strut spacer and 1” preload I think. So you would actually be at 7” lift
 

Nick@GotExhaust

Senior Member
Preferred Vendor
Joined
Aug 1, 2017
Posts
6,803
Reaction score
5,444
Location
SC
Ram Year
2017
Engine
6.4
@RJL1 So can the 6" inch kit with the coilovers put the front at only 5" or can it go down to 4"?


so without the preload spacer and running the 2.0 coil overs at the lower setting you would be at 5", you can adjust them up to 7" of lift. so anywhere between 5" to 7"

No issues running Foix 2.0 coil overs with the Zone lift. We have lots of customers running that exact set up and love it.
 
Top