Just got AlfaOBD(today) and 2 new FOBIKs for my 2010 Ram 1500, I ran through the FOB programming guide in this thread, fob walk through and options available for me were not the same so I'm likely missing something.
Problem:
Old FOBIK works 100% - lock/unlock/starts truck
Both new FOBIKs start truck but lock/unlock doesn't work. System sees lock and unlock buttons pressed but lock/unlock events don't occur.
After RF-Hub connects, only option available is "Program ignition key or fob". New FOBIK each receive, "Test successful" msg. Notes states: New key must be in "RUN" position, must run replaced ELV/ESCL/PEM after if systems installed, ELV/ESCL/PEM = "System no present".