What did you do with your 4th Gen this week?

18CrewDually · Jun 12, 2022

raggdoll said:
Can you give the details on the rims and tires?

Post in thread 'Lowered 4th Gen Pics - Show Em Off!' https://www.ramforum.com/threads/lowered-4th-gen-pics-show-em-off.50893/post-2671116

DILLIGAF · Jun 12, 2022

Building it a home. 30K so far in materials...lol...

9A1YSx&tn=AqgxT6Gb_SESkm2_&_nc_ht=scontent.fyxd1-1.jpg

RayGar · Jun 13, 2022

Installed new headlights with LED running lights & turn signals. They work great, until I start the truck, the sequential turn signals & DRLs quit working. None of the local installers were any help. Resistors don’t help and I can’t figure it out. Is there a computer fix or reprogramming that’ll fix this? I’m out of ideas

bcbouy · Jun 13, 2022

complete top to bottom detail.it only took 5.5 hours,but she looks gooood.

Rick Cicchetti · Jun 13, 2022

Hauled my atv's to PA.

NOV87 · Jun 13, 2022

Replaced coil packs at 108k. No more pinging at 3000 rpm.

thestuntboy · Jun 13, 2022

Campy outdoorsy things. 190 miles on 28 gallons uphill CT to VT.

az chip · Jun 13, 2022

Installed the Deezee tailgate assist

spacex · Jun 13, 2022

DILLIGAF said:
Building it a home. 30K so far in materials...lol...
View attachment 495300

Building makes me drool, price makes me pucker

. Looks awesome!!

Jbyron · Jun 15, 2022

Class V hitch and amp bed step installed.
Carven tips also pictured

Gregdad · Jun 15, 2022

Got some new lights for Bday gift from the wife.

Wirerat · Jun 16, 2022

Added 1.5" blocks to bring the rear up to level. It's about 1/2 inch of rake. 3" rc struts with upc up front.

az chip · Jun 17, 2022

Cleaned the low beam area of my lenses with this stuff called HID cleaner. Then I cleaned the high beam area with LED cleaner. Think the results are pretty good. I am happy with them. Underground lighting shipped quick. Sure wish they had double sided tape instead of those non self tapping screws for the power supply. Other than that small thing, pretty happy with them. First two pics are low beam HID. Last shot is high beam LED that I got local.

jelih · Jun 17, 2022

2 weeks ago I had new shocks put in, but I screwed myself out of some money in doing so, because last weekend I had the MaxTrac 4.5"/3" lift/level kit installed, along with new Moog upper and lower control arms. The lift came with the rear shocks, so now I have two week-old shocks with about 100 miles on them and absolutely no use for them. Whatever.

I absolutely love the way the way it sits and rides now. A few months ago I put on new PowerStop rotors and pads on all 4 wheels, but I was unimpressed. Turns out ****** shocks will ruin braking performance because as soon as I put the shocks on the brakes seemed to work like new all of a sudden. And the lift also comes with longer brake lines, which also seems to have improved the braking. It's like a whole new truck. Also, the carrier bearing spacers for the lift seem to have almost completely done away with the 2-1 bump. It's still there, but just barely, and now and I'm not cringing in anticipation of it at every stop light. Later tonight I'm going to point my headlights down some. Nobody has flashed me yet, but I feel bad for the people in front of me on my way to work every morning.

IDSandman · Jun 17, 2022

It takes two seconds to re aim your lights. For the safety of others amd yourself do it asap. I did mine immediately after my lift, before it hit the road.

Gregdad · Jun 18, 2022

Installed these ebay puddle lights today. Incredible brightness compared to the stock lights

ClassicJoe · Jun 18, 2022

Installed Rough Country 2" leveling struts and Rough Country rear shocks. Also ordered new Rough Country UCAs for 0-3" lifts.

Unfortunately, also discovered that the storm that came through last night ruined my tonneau cover, so now I will be shopping for that as well.

az chip · Jun 19, 2022

Installed a Mopar (thanks Benny) rear bumper step. Great tool for old guys!

Adamcr68 · Jun 19, 2022

VolsRam said:
So I searched the forum for a thread like this and didn't find anything. I figured it would be fun to have a thread that everyone can watch what everyone is doing each week.

This week I put on Steelcraft nerf bars, and right now I'm getting the permaplating put on the truck. This way it gets a real good bath.

I did a oil change, dumped my catch can & greased the suspension. A big thank you to Nick-@gotexhaust- got my oil to me in 2 days & when I had a question he pm’s right away, awesome customer service! I couldn’t find a 820 so got the 500 & thanks to a post I saw in the oil filter thread about going in from the front over the cross member instead of trying to squeeze up past the steering rack & axle, made it so much easier

Fediej · Jun 20, 2022

az chip said:
Installed a Mopar (thanks Benny) rear bumper step. Great tool for old guys!
View attachment 495760
View attachment 495761
View attachment 495762

Looking for one of these, how do I get in contact with this Benny character?

What did you do with your 4th Gen this week?

Senior Member

Senior Member

Junior Member

Attachments

Senior Member

Member

Senior Member

Senior Member

Attachments

Senior Member

Senior Member

Senior Member

Senior Member

Attachments

Senior Member

Attachments

Senior Member

Member

Attachments

Senior Member

Senior Member

Attachments

Senior Member

Senior Member

Senior Member

Attachments

Senior Member

Similar threads

Forum statistics

Share this page