Meatmans 19' warlock

Meatman8769 · Jun 27, 2022

Added black sidesteps
Mopar cold air intake
Ram air hood vent
33 x 12 toyo open country rt tires
Sitting on 20 x 12 kmc wheels

Muffler swap and fox suspension on the way.

Wish list will be headers and bigger exhaust tips in black and possibly rock guard or black wrap on the lower half of the truck.

CheechDogg.0n37s · Jun 27, 2022

Looks good !!! Like the blue and black together looks B@D@$$ ...

Are you planning on going with bigger lift kit later on?

And I would suggest you spray the lower half of the truck with raptor bedliner which you could do yourself if you want to wrap it black , that will help against rock chips and would look B@D@$$ , I have been thinking about doing it to mine but just haven't had the time to do so ..

Either way it looks good !

czervika · Jun 27, 2022

Looks great!

Meatman8769 · Jun 27, 2022

CheechDogg.0n37s said:
Looks good !!! Like the blue and black together looks B@D@$$ ...

Are you planning on going with bigger lift kit later on?

And I would suggest you spray the lower half of the truck with raptor bedliner which you could do yourself if you want to wrap it black , that will help against rock chips and would look B@D@$$ , I have been thinking about doing it to mine but just haven't had the time to do so ..

Either way it looks good !

Thanks man. Ya thats what I've been leaning towards. Got a good polish on her a month ago and notice some savage rock chips. That was to be expected though having offsets and no mud flaps. Rather this look. Got a good local shop for bedliners so will see what they say. If they don't do the sides I'll do my self. Would definitely be great protection

CheechDogg.0n37s · Jun 27, 2022

Meatman8769 said:
Thanks man. Ya thats what I've been leaning towards. Got a good polish on her a month ago and notice some savage rock chips. That was to be expected though having offsets and no mud flaps. Rather this look. Got a good local shop for bedliners so will see what they say. If they don't do the sides I'll do my self. Would definitely be great protection

Not hard to do at all yourself, the kit itself is less than $100 USA and you really would only need 1 quart of it but I would spray it with 2 quarts for a thicker layer

crazykid1994 · Jun 27, 2022

I sprayed just the bottom and inside of the rocker panels with bedliner. Used a rattle can from Home Depot. Like 3 or 4 coats of spray after using a Soft brillo pad to get some scuffs in the paint. It’s a bit hard to see in the picture but I used the lower line if the body as my edge for the bedliner. I think there’s more pics in my build thread. Also built home made rocker guards/side steps that are also door ding protectors. I was going to spray the whole rocker panel but figured my steps are good enough and eventually I’ll make true full wheel to wheel rock sliders.

CheechDogg.0n37s · Jun 27, 2022

crazykid1994 said:
I sprayed just the bottom and inside of the rocker panels with bedliner. Used a rattle can from Home Depot. Like 3 or 4 coats of spray after using a Soft brillo pad to get some scuffs in the paint. It’s a bit hard to see in the picture but I used the lower line if the body as my edge for the bedliner. I think there’s more pics in my build thread. Also built home made rocker guards/side steps that are also door ding protectors. I was going to spray the whole rocker panel but figured my steps are good enough and eventually I’ll make true full wheel to wheel rock sliders.

It gave it an extra 2" of height lol ...

Meatman8769 · Jun 27, 2022

CheechDogg.0n37s said:
It gave it an extra 2" of height lol ...

Haha more protection the better. Mines been tasting a lot of rocks

Meatman8769 · Jun 27, 2022

crazykid1994 said:
I sprayed just the bottom and inside of the rocker panels with bedliner. Used a rattle can from Home Depot. Like 3 or 4 coats of spray after using a Soft brillo pad to get some scuffs in the paint. It’s a bit hard to see in the picture but I used the lower line if the body as my edge for the bedliner. I think there’s more pics in my build thread. Also built home made rocker guards/side steps that are also door ding protectors. I was going to spray the whole rocker panel but figured my steps are good enough and eventually I’ll make true full wheel to wheel rock sliders.

Looks good! I may go a little higher but don't wanna cover up too much of the nice patriot blue color

crazykid1994 · Jun 27, 2022

Meatman8769 said:
Looks good! I may go a little higher but don't wanna cover up too much of the nice patriot blue color

Originally I was going to use the body line right at the bottom of the door but was t entirely sure so went lower since the rest is protected by my steps

Meatman8769 · Jun 27, 2022

crazykid1994 said:
Originally I was going to use the body line right at the bottom of the door but was t entirely sure so went lower since the rest is protected by my steps

That's what I'm thinking is the body line at the door. Ya your steps look like they cover much more than mine. Which ones are yours?

crazykid1994 · Jun 28, 2022

Meatman8769 said:
That's what I'm thinking is the body line at the door. Ya your steps look like they cover much more than mine. Which ones are yours?

Custom. I made them in my garage.

Meatman8769 · Jun 28, 2022

crazykid1994 said:
Custom. I made them in my garage.

Crazy! Beautiful work bro. Patent that **** haha

Meatman8769 · Jul 1, 2022

So here we have my hood vent ram air which will sit on top of my already installed Cai. Which looks like.it could use a cleaning haha. So don't mind that.
As well we have the matte black wrap that came in for my front emblem. It doesn't cover the entire grey letters like I was hoping but turned out great and looks decent with a black middle and silver outline.
Also installed the Mishimoto oil catch can but forgot to take a pic of that.

Meatman8769 · Jul 1, 2022

Long weekend here in

Meatman8769 · Jul 8, 2022

Magnaflow muffler installed. Rear fox shocks installed and waiting for the other front to come in then the shocks will be complete!

grahamgraham · Jul 18, 2022

I typically don't like side steps, but I like them on your truck

Meatman8769 · Jul 18, 2022

Cleaned things up a bit this weekend. Can see the catch can up front now

Meatman8769 · Jul 28, 2022

So in the last little bit since getting the mishimoto oils catch can. I've also added the Fox 2.0 performance shocks all around, man is it ever smooth. May need to add an 2"lift in the front to level it out again. Feel like the rough country 1" isn't doing much anymore and I'm still getting some rubbing with my 33s and -44 offset. only at full crank.
If it wasn't mentioned earlier in this thread the magnaflow direct fit muffler was installed and sounds amazing. Has a really nice rumble and isn't abnoxiously loud. Will keep it on until I do the borla touring catback next year.
Also trying out the diablo pulsar right now. Has some cool settings for saving gas or if you want to ramp the performance up a knotch. Will run this a bit until I need to get an actual tune done.
Right now the trucks running and feeling like a dream

Meatmans 19' warlock

Member

Attachments

Banned

Senior Member

Member

Banned

Senior Member

Attachments

Banned

Member

Member

Senior Member

Member

Senior Member

Attachments

Member

Member

Attachments

Member

Attachments

Member

Attachments

Member

Member

Attachments

Member

Similar threads

Forum statistics

Share this page