Prayinmantis
Junior Member
I have a 2018 ram 1500 limited 2wd w/air ride that i am trying to lift. I've been told I can use the bds 4in lift for a 4x4. Is this true? Does a 2wd and a 4wd have to same suspension setup?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
You can only use the rear , you would still need the spindles up front to lift it, don't use spacers lol ...I have a 2018 ram 1500 limited 2wd w/air ride that i am trying to lift. I've been told I can use the bds 4in lift for a 4x4. Is this true? Does a 2wd and a 4wd have to same suspension setup?
Are you going to regear now ? ...lol .... If you do , you are going to see a huge difference ... I want to get theMaxtrac is what i went with 2wd. I got the 7in kit they have a five also that looks really clean with 35s. the 7in fits 37s
From Maxtrac or CST suspension ...they both sell the spindles by themselves ...Do you know where i can get the spindals or a kit that works for my setup
I don't mind losing it if it do not throw any codes or dash lightsAre you wanting to get rid of the air suspension? They do sale lift links to adjust the ride height on the truck that are a simple install & adjustable.
How much does it cost to regearAre you going to regear now ? ...lol .... If you do , you are going to see a huge difference ... I want to get the
From Maxtrac or CST suspension ...they both sell the spindles by themselves ...
Since my truck is only a 2wd it was only $850 ... so you should be looking around that price range as wellHow much does it cost to regear
Now do you have both front and back lift from maxtracSince my truck is only a 2wd it was only $850 ... so you should be looking around that price range as well
I do yes, with the fox shocks all around ... I did have to add the carrier bearing spacer kit which you will also need to stop vibrations do to the incorrect angle of the drive shaft ...Now do you have both front and back lift from maxtrac
Now this fits factory air ride? Or just regular 1500 2wdI do yes, with the fox shocks all around ... I did have to add the carrier bearing spacer kit which you will also need to stop vibrations do to the incorrect angle of the drive shaft ...
Also make sure they add the 1.5 spacer in the rear or you will be squatting ...
This is the carrier bearing spacer kit you will need :
2009-2018 Dodge RAM 1500 2wd Carrier Bearing Spacer Kit - MaxTrac 612400
MaxTrac Suspension Store Lowering Kits, Lift Kits & Leveling Kitsmaxtracstore.com
I know it fits regular 2wd, not sure about factory air ride sorry ...Now this fits factory air ride? Or just regular 1500 2wd