2010 Dodge Ram 1500 TIPM help Fuel pump

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

StephenM

Junior Member
Joined
May 21, 2021
Posts
13
Reaction score
6
Location
Danville pa
Ram Year
2010
Engine
5.7
I’m attempting to fix my TIPM. I’m having the common no power to fuel pump. I’ve done quite a bit of research and mostly all the TIPM repairs are from 2011 and up or 2008 and lower. I’ve opened up my TIPM and the layout and completely different. I was wondering if anyone had a diagram letting me know which relays or for what and which one is the FUSE PUMP

move included pics of mine mostly all the repair guides and videos are from 2011 and up which are different
 

Attachments

  • 91B69B46-8150-471C-9B23-187F282336FE.jpeg
    91B69B46-8150-471C-9B23-187F282336FE.jpeg
    133.9 KB · Views: 12

red express

Junior Member
Joined
Jun 23, 2022
Posts
1
Reaction score
0
Location
Pearland
Ram Year
2011
Engine
5.7
I used Vertical Visions jumper cable for almost two years on my 2011 Ram 1500 . As they say the jumper is not the cure. Mine started doing the same thing with the cable. I sent it off to them and less than ten days and $225.00 got it back. Two months later no problems.
 

Jeepwalker

Senior Member
Joined
Sep 8, 2017
Posts
3,229
Reaction score
3,445
Location
WI
Ram Year
2012 Reg Cab, 4x4
Engine
5.7 Hemi
....or you could just replace the relay itself, since you have the TIPM already out. There's a image on Vertical Visions which shows which relay it is. When you're finished soldering it in, put a few daubs of clear nail polish (or wood varnish) over the solder joints for moisture-proofing. I bought one to throw in my truck's glove box, in case it flakes out. Inspect your TIPM, maybe it's just a cold solder joint and not the relay itself. The relays are spec'd for a million cycles, but of course cut that in half.

 
Last edited:

Submariner47

Junior Member
Joined
Jun 23, 2022
Posts
4
Reaction score
0
Location
wv
Ram Year
2013
Engine
hemi 6.1
thought I had clogged filter so replaced fuel pump found real issue no power to the fuel pump put in a jumper with a switch truck runs now but would like to repair correctly 1. the jumper is direct feed to the pump with a switch turn off when truck not running will this work as a temp fix. what and where is the TIPM ??? should have done more research before replacing fuel pump
 

Jim BB

Senior Member
Joined
May 23, 2022
Posts
362
Reaction score
322
Location
Hamilton ,ON
Ram Year
2019 Ram 1500 classic Express
Engine
Hemi 5.7L
I’m attempting to fix my TIPM. I’m having the common no power to fuel pump. I’ve done quite a bit of research and mostly all the TIPM repairs are from 2011 and up or 2008 and lower. I’ve opened up my TIPM and the layout and completely different. I was wondering if anyone had a diagram letting me know which relays or for what and which one is the FUSE PUMP

move included pics of mine mostly all the repair guides and videos are from 2011 and up which are different
Looking at your pic it also shows lots of corrosion on several of the terminals may be start by trying to clean them and other ends first before messing with jumpers and resoldering it may be a lil more work but why replace or do something that is not necessary
 
Top