LED conversion issue with weird lighting

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Walleye123

Junior Member
Joined
Aug 14, 2022
Posts
6
Reaction score
1
Location
Ohio
Ram Year
2013 Laramie
Engine
5.7 hemi
Hi !
New guy here :)
Hope someone can help me out .
I own a 2013 Dodge Ram laramie
Switched out the headlights
to Alpharex pro series…..
Turn signal is led
Bright is halogen with projector
Dim is halogen with projector
So I switched out the dim with hikari
Megatron
Switched out bright with Hikari hyperstar
What’s up with this image ????
 

Attachments

  • 8583A196-C71A-407C-9F58-024B2AF40F8D.jpeg
    8583A196-C71A-407C-9F58-024B2AF40F8D.jpeg
    72.1 KB · Views: 16

crash68

ACME product engineer
Staff member
Administrator
Supporting Member
Joined
Mar 20, 2016
Posts
10,704
Reaction score
16,710
Ram Year
2015
Engine
3.0 EcoDiesel
If the High beam are on, you won't see a flat cut off line as they don't have the shield in them.
How do you have the LED bulbs indexed?
 
OP
OP
W

Walleye123

Junior Member
Joined
Aug 14, 2022
Posts
6
Reaction score
1
Location
Ohio
Ram Year
2013 Laramie
Engine
5.7 hemi
They are indexed at 12 and 6 oclock
•|• •|•
 

rule18

Admin
Staff member
Administrator
Supporting Member
Joined
Jan 31, 2013
Posts
7,130
Reaction score
8,053
Location
NY
Ram Year
2017 Rebel
Are they fully seated? Those secondary reflections show up sometimes if the lamps aren't locked in place.
 
OP
OP
W

Walleye123

Junior Member
Joined
Aug 14, 2022
Posts
6
Reaction score
1
Location
Ohio
Ram Year
2013 Laramie
Engine
5.7 hemi
I thought they were but I will do a recheck !
Thanks
 

crash68

ACME product engineer
Staff member
Administrator
Supporting Member
Joined
Mar 20, 2016
Posts
10,704
Reaction score
16,710
Ram Year
2015
Engine
3.0 EcoDiesel
Typically the index references the LED chip direction, side to side is 3/9 o'clock, up/down is 12/6 o'clock. You might want to try rotating the LEDs 90° to see if the output is better.
You won't get a flat cut off line from the Alpharex high beams
 
Top