AlfaOBD TV

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Gixxer750

Senior Member
Joined
Jan 10, 2020
Posts
368
Reaction score
141
Location
N. Idaho
Ram Year
2015_2017
Engine
Hemi 5.7
I'm not having another luck either. If I do not connect to the dongle but open alpha and go to the radio and open the list of options I see what is much more similar to what I did with the last ram. Once I connect the list changes. I've made all the changes that I can even fathom, but no luck. I can't even get a video signal while in park. I think I have connectivity issues. I felt optimistic when I had audio at all times, but im getting a little flustered so may just hit pause till I feel rambunctious again
 

Terry2014RAM

Member
Joined
Oct 11, 2018
Posts
44
Reaction score
10
Location
OKC
Ram Year
2014
Engine
5.7
Reposting info here in a separate thread with more detail for anyone interested...

2 LockPicks have failed on me so I won't go that route again. I had every input on the LockPick in use so I was left with a Digital TV tuner and front/cargo/left/right cameras inoperable.

@Mpgrimm2 let me know about some tricks others on the forum had figured out to get a front and/or cargo camera working using AlfaOBD.

So I've run switched ACC power to power all of the aforementioned accessories and I have a (cheap) manual RCA switch which shipped quickly by air from from Korea...

RCA switch
View attachment 439354

I've turned on the cargo camera with AlfaOBD and used @Mpgrimm2 's $20 camera harness for video.

AlfaOBD Cargo Camera Settings to enable:

VehConfig 1 - CHMSL Camera
"Yes"

CBC Features - LED CHMSL Lamp Present
"Yes"

If you stop here, you'll have a working video input on the on-screen cargo camera button.

I then removed the factory pins for the radio AUX input at the back of the radio and inserted my own re-pinned RCA Jack's for right/left audio on pins 6/7 respectively...

View attachment 439355

I now have left/right audio and video for Digital TV on the 8.4 screen.

DTV
View attachment 439356

To watch TV, I currently select the AUX input for audio and then switch to the cargo camera (and I wait for my wife to come out of Target). I probably could have left the factory AUX jack useable by just tapping them for my audio, but I decided that was more than I cared to try after discovering I no longer even owned and AUX cable.

I use the cheap switch which I placed in my glovebox for now to leave it on front camera for most of the time...

Front Camera
View attachment 439357

View attachment 439358

But I can also select the other two cameras or DTV if needed without opening the dash up...

Cargo Camera
View attachment 439359

Right Mirror Mirror
View attachment 439360


Costs

Cameras used (front/left/right) $17 each

CNGATE Front Car Camera |360 Degree Eyeball CCD Waterproof Front Car Camera with Wide Angle https://smile.amazon.com/dp/B00AWRAYA2/ref=cm_sw_r_cp_apa_i_uFzrEbQB6Y9Y6

Mpgrimm2 RCA harness (x3 if you want video/left audio/right audio) $20 each

DTV receiver (this one gives you an extra input) $50-$70

https://www.ebay.com/itm/Pyle-View-...44720.c10&nordt=true&rt=nc#vi__app-cvip-panel

This is the smallest/cheapest video only RCA switch I could find $20ish...

https://www.ebay.com/itm/4-Port-SIN...1?pageci=e9fa0da2-1c5b-4632-a89e-5e3a45b702a2

There are many options for the cargo camera and I no longer would recommend the one I'm using because while it is good it has more than doubled in price since I purchased it.

That's it! Much cheaper and likely more reliable than a LockPick! It was $50 to have the first LockPick replaced UNDER WARRANTY!!! You can get AlfaOBD for that much! AlfaOBD wins again!

Sent from my HTC U11 using Tapatalk
Mpgrimm2 I also have Cargo Cam setup like him but I do not have the the buttons during camera view to change to change between revers and cargo. I recently retrofitted my 2014 Laramie 5.7L to the 2018 UAQ. Everything else is working fine.

Any thoughts?
 

GTyankee

Senior Member
Supporting Member
Military
Joined
Nov 2, 2020
Posts
10,146
Reaction score
12,788
Location
El Cajon Calif. 92021
Ram Year
2016
Engine
3.0 ecodiesel
I recall that the Lockpick back in 2009/2010, had to have a wire attached to the foot brake.
It fooled the Video input to believe that the vehicle was Parked with the Brake on
 
OP
OP
SitKneelBend

SitKneelBend

Senior Member
Military
Joined
Jan 8, 2015
Posts
9,098
Reaction score
4,789
Location
St. Louis
Ram Year
2014
Engine
3.6 Pentastar
Mpgrimm2 I also have Cargo Cam setup like him but I do not have the the buttons during camera view to change to change between revers and cargo. I recently retrofitted my 2014 Laramie 5.7L to the 2018 UAQ. Everything else is working fine.

Any thoughts?
The AlphaOBD instructions in my post are what you need to implement. Two config changes.
 

diboblo

Senior Member
Joined
Mar 12, 2019
Posts
125
Reaction score
71
Location
California
Ram Year
2015
Engine
6.2
@SitKneelBend

Will you provide a part number, for the pins you used to build your audio aux input harness?

PM is cool. Don't want to clog the thread.

Going to try adding wireless hdmi, to my rig.

Thanks,
Bob
 
OP
OP
SitKneelBend

SitKneelBend

Senior Member
Military
Joined
Jan 8, 2015
Posts
9,098
Reaction score
4,789
Location
St. Louis
Ram Year
2014
Engine
3.6 Pentastar
@SitKneelBend

Will you provide a part number, for the pins you used to build your audio aux input harness?

PM is cool. Don't want to clog the thread.

Going to try adding wireless hdmi, to my rig.

Thanks,
Bob
@Mpgrimm2 made it for me. He makes loads of custom harnesses for our trucks. I'm not sure if he still makes these though.
 
Top