Jawsopter
Member
First, I would like to thank everyone that helped in figuring out my TPIS mess.
I have a 2011 Ram 3500, and was trying to get my TPIS system to work. Struggled with it for a while then it finally clicked. Anyone who has a Ram 10 - 12 should double check the wiring at the TPMS connector. Mine had the CAN+ and the CAN- backwards. Verify the pins before trying to program anything with AlfaODB. Long story short, it works........
Attached are the schematics and photos to prove that it works, as well as a link for the sensors.
Also include the previous post where it all started..
Thanks again.
Kevin
I have a 2011 Ram 3500, and was trying to get my TPIS system to work. Struggled with it for a while then it finally clicked. Anyone who has a Ram 10 - 12 should double check the wiring at the TPMS connector. Mine had the CAN+ and the CAN- backwards. Verify the pins before trying to program anything with AlfaODB. Long story short, it works........
Attached are the schematics and photos to prove that it works, as well as a link for the sensors.
4 PCS TPMS SENSOR 68241067AB, 433MHZ Car Tire Pressure Monitoring System, fit for CHRSLER DODGE FIAT JEEP Grand Cherokee Wrangler : Amazon.ca: Automotive
4 PCS TPMS SENSOR 68241067AB, 433MHZ Car Tire Pressure Monitoring System, fit for CHRSLER DODGE FIAT JEEP Grand Cherokee Wrangler : Amazon.ca: Automotive
www.amazon.ca
Also include the previous post where it all started..
TPMS & TPIS
Hello Benny, I have researched TPMS and TPIS a fair bit and have a question for you. Im probably the only person trying to activate my TPIS on my truck, seems like everyone is trying to de-activate it ...LOL My truck is a 2011 Ram 3500 6.7 SLT and i have enabled the TPIS on the EVIC screen via...
www.ramforum.com
Thanks again.
Kevin