wires to the back seats??

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Freakydude

Senior Member
Military
Joined
Aug 20, 2022
Posts
108
Reaction score
112
Location
ontario canada
Ram Year
2018
Engine
Ecodiesel
so this is a 2018 1500 EDiesel. I have a set of wires going to the back seats. they attached via a female clip but the clip in the back is female as well. Could this be aux wires for something like heated seats etc.
They are powered and I have no idea what they are for. Unplug them with the truck running and there is no change.
I have front heated and am looking at installing rear heated seats. Extra wires drive me nuts and I have no freakin idea what these would be for.
 

Attachments

  • IMG_0634.JPG
    IMG_0634.JPG
    88.9 KB · Views: 28
  • IMG_0635.JPG
    IMG_0635.JPG
    124.4 KB · Views: 28

CAGEYAR

Senior Member
Joined
Jan 17, 2022
Posts
105
Reaction score
151
Location
Stockton, NJ
Ram Year
2017
Engine
5.7L HEMI
Short male-male jumper connects the two females.
Goes up behind seatback.
Rear window defroster grid? Do you have a rear window defroster?IMG_7813.jpeg
 
OP
OP
Freakydude

Freakydude

Senior Member
Military
Joined
Aug 20, 2022
Posts
108
Reaction score
112
Location
ontario canada
Ram Year
2018
Engine
Ecodiesel
yes I have a defroster, but the wires go to a clip, plug in then there is nothing from the other side of the clip. I'll put a multimeter on it and turn on the defrosters. good call on that one though, that might be it.
 

mtnrider

Senior Member
Joined
Sep 25, 2014
Posts
3,179
Reaction score
3,436
Location
Georgia
Ram Year
2016
Engine
6.7 Cummins
^ Yep, they are for under seat lighting

.
 
Joined
Nov 20, 2018
Posts
0
Reaction score
65
Location
Riverside California
Ram Year
2018 2wd
Engine
HEMI 5.7 Revolution 4.88s
Those are for the lighting, I used those to add 2 blue Oznium 11 mm bolt leds to the bottom of the interior B pillars ..

I ran the wire to those connectors and the lights come on when you open the doors or use the dial to turn on the lights ..

1667398958025.png

1667398977243.png
 

Gregdad

Senior Member
Joined
Aug 14, 2017
Posts
646
Reaction score
1,072
Location
Fort St. John BC, Canada
Ram Year
2022
Engine
5.7
Those wires are for rear footwell lighting. My 19 Express had those so I put lights under my back seats. Those wires will only have power for a couple seconds after shutting the doors, then fade to off just like the front footwell lights.
 
Joined
Nov 20, 2018
Posts
0
Reaction score
65
Location
Riverside California
Ram Year
2018 2wd
Engine
HEMI 5.7 Revolution 4.88s
Thanks! Id like to make them up, just curious in what connector to buy.
I will take the picture of the connectors to buy, got them from autozone, not the right size but I was able to smash them thinner like the ones you need, no issues ...

I also made the harness for @the_goodguy07 's truck as well ..
 
Joined
Nov 20, 2018
Posts
0
Reaction score
65
Location
Riverside California
Ram Year
2018 2wd
Engine
HEMI 5.7 Revolution 4.88s

Gregdad

Senior Member
Joined
Aug 14, 2017
Posts
646
Reaction score
1,072
Location
Fort St. John BC, Canada
Ram Year
2022
Engine
5.7
Those wires are for rear footwell lighting. My 19 Express had those so I put lights under my back seats. Those wires will only have power for a couple seconds after shutting the doors, then fade to off just like the front footwell lights.
 

Jeepwalker

Senior Member
Joined
Sep 8, 2017
Posts
3,228
Reaction score
3,442
Location
WI
Ram Year
2012 Reg Cab, 4x4
Engine
5.7 Hemi
Top