Steven Roethler
Junior Member
I got a 1989 w150 that im swapping from auto to manual. I have an np435 out of a 79 powerwagon. I rebuild the shifter tower and put new bearings and such in. However I am not able to get it into 1st gear or reverse. 2nd, 3rd, and 4th all work fine. When I try to put it into first it pops in slightly but with minimal effort it will pop out if I push the shifter back slightly and it won't even attempt to do into reverse. I did make sure to put the tower and gears both into neutral position before I put the tower back on. Anyone have any ideas?
Thanks!
Thanks!