Frank Smith
Member
My installer is trying to install a 2009+ 5.7L Hemi that has been "remanufactured" by a Mich. engine building company and it seems that the new engine is not building any oil pressure. The oil sensor was swapped to see if that was the issue, but there was no change. The oil filter was pulled and the was no oil up to the filter.
The pickup tube was checked and seems to be fine so any ideas what might be going on?
Having a hard time getting the engine remanufacture to communicate with us and makes it very difficult to trouble shoot.
Engine is in a 2003, 2500 truck with no cyl. shutdown electronics.
Help?
The pickup tube was checked and seems to be fine so any ideas what might be going on?
Having a hard time getting the engine remanufacture to communicate with us and makes it very difficult to trouble shoot.
Engine is in a 2003, 2500 truck with no cyl. shutdown electronics.
Help?