leviwiggins
Junior Member
- Joined
- Oct 21, 2022
- Posts
- 3
- Reaction score
- 2
- Location
- North Carolina
- Ram Year
- 2016
- Engine
- Cummins 6.7
Small rust bubble on rocker panel
- Thread starter leviwiggins
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
nekkidhillbilly
Senior Member
- Joined
- Dec 5, 2017
- Posts
- 265
- Reaction score
- 71
- Ram Year
- 2017
- Engine
- hemi
once you get in there its gonna be way worse. i wouldnt mess with it tell it blew out.
2020PW
Senior Member
Might as well knock the paint off it and see if it’s just a surface blemish or a bigger issue. Take care of it before it gets $$$
- Joined
- Aug 20, 2022
- Posts
- 108
- Reaction score
- 112
- Location
- ontario canada
- Ram Year
- 2018
- Engine
- Ecodiesel
get it while it is small. tape it off, sand it down to metal, treat it with an anti rust primer and rebuild the paint. Its on the rocker panel so much easier to do now than when it does get bigger because it will.
chaz10
Junior Member
Take cut off wheel, cut out damaged metal. remove paint around area to be sure all rust is removed. including inner fender, treat with POR 15 . cover with Mopar fender Flares. don't forget to remove inner fender. I did my 09 approx 5 years ago no visible rust . Dont forget to clean out and treat front fenders at the same time
