- Joined
- Mar 16, 2012
- Posts
- 2,180
- Reaction score
- 3,565
- Location
- Midwest
- Ram Year
- 2012, 2021
- Engine
- 5.7, 6.4
Blackfriday22
Looks to take off 15%
Looks to take off 15%
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Couldn't be happier with mine. And they were super responsive and great to deal with when it came time to ship.
Yea thats a killer deal right there…they are basically brand new!Or get them used here for less than half price. Only used for running boards lol:
White Knuckle Rock Sliders 2019+Ram Power Wagon/2500/3500 GAS - auto...
These rock sliders have been used for steps only. They retail for $1850 + shipping and are the heavier gauge .188' Dom. They're powder coated and have the older diamond top plate as a side step for...boise.craigslist.org
Or get them used here for less than half price. Only used for running boards lol:
White Knuckle Rock Sliders 2019+Ram Power Wagon/2500/3500 GAS - auto...
These rock sliders have been used for steps only. They retail for $1850 + shipping and are the heavier gauge .188' Dom. They're powder coated and have the older diamond top plate as a side step for...boise.craigslist.org
It's a swingin' deal. WK is in CA so Boise is closer anyway so shipping may be less. I'll drop them off at any packaging/freight shop in the Boise area for you or anyone else who's interested in saving a hell of a lot of money.Too bad it's on the other side of the country for me, that's a good deal for sure.
It's a swingin' deal. WK is in CA so Boise is closer anyway so shipping may be less. I'll drop them off at any packaging/freight shop in the Boise area for you or anyone else who's interested in saving a hell of a lot of money.
A third person?!?! I installed them by myself lol !I ended up having them powder coated locally, and I'm glad I did. They did a great job, charged me $280, and were done before they said they would be. My son and I got the passenger one installed today, I just need to put the step plate on. Our schedules won't match up again until Friday, so I'll be lopsided until then but I won't need the truck for anything before that.
It took us a bit to figure out how to get the plates to line up easily. A 3rd person would have made it simpler, but in the end I used a bottle jack to make adjustments in place of a 3rd person. Once one bracket is in the rest goes pretty quick.
If you have the in floor storage, remove it prior to trying to put those brackets in. Note the outside is coated in not very tasty dust. Plan accordingly.
A third person?!?! I installed them by myself lol !
Bahahahahah, looks like it might be quite the drive for me lol. Its been a while since i did mine, but if i remember correctly the passenger side was worse.Swing on by and show me how it's done on the driver's side.
Now that I figured it out with the jack I probably could do it alone, but I'd pay for it. Tools are a nice stand in for helpers, I suppose.
Bahahahahah, looks like it might be quite the drive for me lol. Its been a while since i did mine, but if i remember correctly the passenger side was worse.
Excuses, excuses.
Bahahahahah, looks like it might be quite the drive for me lol. Its been a while since i did mine, but if i remember correctly the passenger side was worse.
You drive to me, and i will help haaaaa
Ahhh you have one of those fancy 4.5 gens haaaaaa. Mine is a ‘16….much less stuff in the way i believe.I should have drove to you. Driver's side is the tougher one, so much more stuff in the way.
Tips:
Install #2 and #3 first, in that order. That gets the weight off it and makes it easier to adjust to get the front and rear on. Instructions say to put the front on first, but there's so much stuff in the way it's way easier once #2 is in.
Instructions say you don't have to take the gas tank skid off but it makes it easier. I split the difference and just took the front bolts out and let it hang. That gave me enough room.
Oddly, #3 doesn't quite touch my frame. I called White Knuckle and sent them pics. They said sometimes it happens on a diesel where the frame isn't quite the same. I have a '21 Power Wagon, I wonder if COVID builds maybe got whatever was next on the line, but I don't know how to tell a diesel frame from a gas frame or if that's even it. Anyway, they are sending me a shim to put in, which is fine. I can't imagine it'll go anywhere between now and installing it with everything cinched up, it's sturdy AF.