Lowered 4th Gen Pics - Show Em Off!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Mcginnis

Member
Joined
Feb 21, 2012
Posts
96
Reaction score
27
Location
Forney, TX
Ram Year
2013
Engine
Hemi 5.7
This is my 2017 sport with belltech 2/4 and 285/45r22. It’s settled a lot in the front but not so much in the rear. Probably gonna cut 3/4 of a coil off the rears.
 

Attachments

  • 2A013DCD-FE1B-4C0E-AB55-37ABE1E62E6F.jpeg
    2A013DCD-FE1B-4C0E-AB55-37ABE1E62E6F.jpeg
    202 KB · Views: 52

olyelr

Senior Member
Joined
Nov 18, 2018
Posts
4,674
Reaction score
3,419
Location
Kewadin MI
Ram Year
2016
Engine
6.4

MartyZ

Senior Member
Joined
Feb 10, 2020
Posts
834
Reaction score
551
Location
Lake Orion, MI
Ram Year
2014
Engine
2500 5.7l Hemi
You sure thats 4x4!?!? I have no clue how a solid front axle could possibly fit under the cummins when its that low….
Good point, ill have to look closer next time he drives it in. It was 4x4 from the factory. Now im curious if he kept it and how.
 

HemiLonestar

Senior Member
Military
Joined
Jun 1, 2012
Posts
5,991
Reaction score
2,952
Location
MD
Ram Year
2016
Engine
5.7 hemi
What did it take to adapt the 6.1 / 6.4 manifolds to your truck.
They are likely the SRT Grand Cherokee manifolds, these were discovered to fit/clear everything at the beginning of the 4th gen run.
 

StateOfMind

Member
Joined
Oct 3, 2023
Posts
35
Reaction score
25
Location
Orange County
Ram Year
2018
Engine
5.7 Hemi
Didn't think the lowered look was for me, but after viewing all the hotness in this thread, I'm starting to appreciate it more, not just the single cabs, but the QC & CC too. Awesome trucks all
 
Last edited:
Top