Installed AlphaRex Pro G2

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

HT RICHARDSON

Junior Member
Military
Joined
Oct 13, 2020
Posts
14
Reaction score
8
Location
La Mesa, CA
Ram Year
2019
Engine
3.0L ecoDiesel
Those look nice!! I went with the old G2's. Now...I want the ones you got.

Do both of the white lights in your top picture stay on as DRL's? Is the light at the bottom the turn signal? If so, how bright is it?

With the two sets of LED bulbs, do you have any RFI or inference with your radio?
 

Highway

Senior Member
Joined
Apr 7, 2022
Posts
130
Reaction score
126
Location
Ky
Ram Year
2013
Engine
Hemi 5.7
Nice i have those G2 pros also. Im thinking of going led also
 
OP
OP
B

brianw0048

Senior Member
Joined
Jan 7, 2017
Posts
639
Reaction score
269
Ram Year
2016
Engine
EcoDiesel
Do both of the white lights in your top picture stay on as DRL's? Is the light at the bottom the turn signal? If so, how bright is it?

With the two sets of LED bulbs, do you have any RFI or inference with your radio?

The two white lights and the one underneath are the turn signals. The white ones turn amber.


I only have led in the high beams, I’ve got HID in the lows. No interference that I’ve noticed so far. I made all the necessary changes in alfaobd.
 
Last edited:

Cableman

Senior Member
Joined
Mar 12, 2019
Posts
950
Reaction score
729
Location
Longisland
Ram Year
16
Engine
5.7 hemi
OP
OP
B

brianw0048

Senior Member
Joined
Jan 7, 2017
Posts
639
Reaction score
269
Ram Year
2016
Engine
EcoDiesel
How do you like the 55w ballast with a 5k bulb color? Probably more like a 4500k color on the 55w ballast. Any yellow at all? Can you tell the difference in color between the led 6500kv fahrens?
I’ll check the HID vs LED color tonight. I wasn’t really worried about it…I don’t run the high beams all that much.

The HID doesn’t look yellow to me at all. I didn’t want any blue and am pretty happy with the 5k

Low beam against a brick wall

FEA839E3-D038-441E-958E-AB2816CE446B.jpeg
 

Cableman

Senior Member
Joined
Mar 12, 2019
Posts
950
Reaction score
729
Location
Longisland
Ram Year
16
Engine
5.7 hemi
I’ll check the HID vs LED color tonight. I wasn’t really worried about it…I don’t run the high beams all that much.

The HID doesn’t look yellow to me at all. I didn’t want any blue and am pretty happy with the 5k

Low beam against a brick wall

View attachment 511460
Sure does look white. You use the canbus setup or the none?
 
OP
OP
B

brianw0048

Senior Member
Joined
Jan 7, 2017
Posts
639
Reaction score
269
Ram Year
2016
Engine
EcoDiesel
None on the HID but I’ve got everything changed with Alfa.

The LEDs came with an in-line resistor.
 

Cableman

Senior Member
Joined
Mar 12, 2019
Posts
950
Reaction score
729
Location
Longisland
Ram Year
16
Engine
5.7 hemi
None on the HID but I’ve got everything changed with Alfa.

The LEDs came with an in-line resistor.
Yeah i have mine set to hid already from some others ive tried in the past, now after 2 years 1 of my leds are going out so figure I'd try 55w hid this time until i rip lens off and swap in new bowls if that ever happens.
Im reading some other harness may be needed due to amp draw from higher wattage ballast, but idk
 
OP
OP
B

brianw0048

Senior Member
Joined
Jan 7, 2017
Posts
639
Reaction score
269
Ram Year
2016
Engine
EcoDiesel
The harness draws power from the battery but I never installed it. I’m drawing battery from the factory wiring.

When I first installed my HIDs, occasionally one wouldn’t come on. I’d turn the lights off and back on and it would fire.

They’ve been fine for the past year or two.
 
Top