LTB H7 and 9006 Bulbs with NO Radio Interference

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

HT RICHARDSON

Junior Member
Military
Joined
Oct 13, 2020
Posts
14
Reaction score
8
Location
La Mesa, CA
Ram Year
2019
Engine
3.0L ecoDiesel
I have a set of the Alpharex G2 projector housings in my truck. They came with halogen H7's and I have tried 4 different sets of LED bulbs. My foglights are the stock housings and use 9006 bulbs. For my foglights, I have tried three different sets of LED bulbs.

The issue and why do I change them/try others? All of the sets have had various levels of RFI with my stereo.

I'm looking to get a set of H7 and 9006 bulbs that match in color and have no RFI with my radio. I have tried the clip-on ferrite things and even had a local San Diego shop look at the bulbs and install "high-end" ferrite caps, though they look like the $20 Amazon ones I bought.

Any suggestions?
 
Last edited:
OP
OP
HT RICHARDSON

HT RICHARDSON

Junior Member
Military
Joined
Oct 13, 2020
Posts
14
Reaction score
8
Location
La Mesa, CA
Ram Year
2019
Engine
3.0L ecoDiesel
My solution was to add extended wire to the Auxito bulbs I had from the beginning and clip on four ferrite clips to those wires. For the foglights, I went with Diode Dynamics SS3 pods and added ferrite clips to the extender cables that came with the pods.

The RFI is minimal.
 
Top