What’s your favorite flavor of cordless tools?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Dinky

Senior Member
Supporting Member
Joined
Feb 2, 2019
Posts
2,196
Reaction score
2,464
Location
Oregon
Ram Year
2022
Engine
6.7
I have tons and tons of milwaukee cordless tools. I made the switch back in the day because of their cordless metal shears. Dewalt sucked and makita was $500, been team milwaukee since.
 

gofishn

Senior Member
Joined
Sep 12, 2014
Posts
5,082
Reaction score
10,130
Location
Iowa
Ram Year
2022 Ram 1500 5th Gen, Big Horn, 4X4, Crew Cab, 6'4" Box
Engine
hemi 5.7L, 345 cu in
Blue, Yellow Red.
though, to be honest, Team Lowes hand tools are getting some serious love too.
Like Craftsman, abck i n the 1970's. So darn handy to just take back adn get new one, instantly.
All the so called pro brands are plain junk.
Need a receipt for snap-on warranty?
BS.

SIL told me this when I gave him a ratchet to get regeered.I told teh SIl to tell teh Snap-on Rep, when I bough t the Ratchet, 40 years ago, it was guaranteed for life, the tools life, not mine. The Recieipt was teh name on the side of the tool.

SIL tells his Rep this.
Rep goes I don't know.
SIL goes trust me, you'd rather deal with me, than him
and was that not the warranty, when he bought it?
 

BadHemi2014

Senior Member
Supporting Member
Joined
Feb 7, 2020
Posts
826
Reaction score
1,437
Location
Greater Cincinnati area
Ram Year
2014
Engine
5.7 Hemi
We've had a set of Porter Cable for at least 10 years. Drill, driver, reciprocating saw, circular saw, oscillating saw, flashlight, and I just bought a jigsaw to complete the set. Never a problem, and these tools get used pretty heavily for every sort of indoor and outdoor diy remodeling and projects. I try to take care of my tools, but these have been dropped, knocked over and left at every temperature and they still run like new.
Honestly I got the original combo set because they were affordable and at the time money was tight. I'm pretty impressed frankly. I don't know if they would hold up to heavy daily use, but for residential diy they're great.
For other stuff I have a Bosch orbital sander and air nailer, harbor freight miter saw, table saw, belt sander and 21 gal air compressor, and an old Craftsman corded drill that was my dad's. I'm a big fan of Cub Cadet lawn mowers and Stihl weedeaters (and other tools). Those things take some abuse and run forever.
 

Swezey23

Member
Joined
Aug 1, 2013
Posts
84
Reaction score
42
Location
Austin, TX
Ram Year
2017
Engine
Hemi 5.7
Kobalt lineup. Between the 20v/40v. For home improvement projects, car repair/tuneups/upgrades, and lawncare. It's been great.
From 40V chainsaws to dual 20v battery mower (effective 40V) to all my power tools. I earn money with my keyboard. 3/5 year warranties on the batteries and tools. Can't go wrong with that. Plus blue is my favorite color.
 

JJEH

Senior Member
Military
Joined
Dec 11, 2012
Posts
407
Reaction score
272
Location
Central Texas
Ram Year
2018
Engine
5.7 HEMI
I have Makita for years now and can't complain.
 

blackbetty14

Senior Member
Joined
Oct 23, 2014
Posts
2,694
Reaction score
1,410
Location
CT
Ram Year
2024
Engine
Hemi 5.7 VVT/Etorque
I love red but I have alot of ryobi for the stuff that doesn't get put away hot and wet. You can't beat the cost and versatility of ryobi at the price point. Their cordless brad nailers are built pretty good (AVe Approved them). The tools that get used the most are Milwaukee, 1/2" impact, drills and 1/4 impacts, 3/8" rachets, die grinders etc. Most of my automotive stuff is red basically. I don't do a ton of wood working so I cheap out (router, air nailers blah blah) and the ryobi batteries are cheappppp compared to Milwaukee and the ryobi bleeds over to my 18v lawn tools. I only have 1 dewalt tool and its a corded shorty reciporating saw since Milwaukee didn't offer one. I'm not a fan of Makita but the Rigid brand are really nice actually for the price. If your going to beat on it and use it regularly go with Milwaukee but don't waste your money if your not going to abuse it.
 

Joeking

Junior Member
Joined
Jun 26, 2021
Posts
2
Reaction score
0
Location
Dairy State
Ram Year
2018
Engine
Hemi
Milwaukee. Good tools and warranties. Mostly made overseas but mostly engineered right here in Wisconsin.
 

Jim Bowker

Senior Member
Joined
Feb 1, 2018
Posts
134
Reaction score
147
Location
Saugus, Ma
Ram Year
2017
Engine
Hemi 5.7
I use Ryobi. Say what you want about them, but they've stuck with the same battery platform, so older stuff will still work. They are relatively inexpensive, and have a huge selection of tools. The combination of lithium batteries and brushless motors gives far better battery life. Plus they are easy to spot from a distance. :)
I know that a lot of people user their stuff every day for hours on end, but I know that's not me. I'm ok with buying a cheaper line that does what I need, doesn't let me down, and lasts for years. That doesn't mean that the longest lasting or the most expensive tool is necessarily the best answer for everyone.
Now that I'm in my 50's, I have a bit more disposable income than I did in my early 20's. But back then, I bought a cheap buffer ($20) and a cheap 5 hp 20 gallon oil-free air compressor. Thirty years later, I still have both! I doubt the buffer has much life left in it, but it served its purpose. I still use the air compressor frequently, and it still works.
I'm not saying that all equipment is the same, nor am I saying that cheaper stuff can be expected to last as long under heavy use. But 10 years from now when I'm still using my Ryobi stuff, I'd love to hear from the people who said it was a bad idea.
 

howie12

Junior Member
Joined
Jan 6, 2023
Posts
13
Reaction score
7
Location
Iron RIver, Wi 54847
Ram Year
2020
Engine
Pentastar V6 gas
Early on I bought what I thought was the best tool at the time. I ended up with a mishmash of a Skill and Panasonic drill, both very good until the batteries went . Ther Skill was an old Ni-Cad and the Panasonic was a Nickel MEtal H type. I managed to put new nicads in the Skill battery packa few times and never wore out the drill itself.

After learning the real cost was the battery I switched to Ryobi when they were/blue/gray due to the uniformity of their battery system. Over time I have accu,mulatd quite a stable of them. I still use a few of the original stuff bought in the late '90s/early 2000s and the modern Li-I batteries work great in them. I completely wore out and broke one of their drill/drivers over the years. I find they are a decent quality and with one battery system fitting everythingas long as you stay with the 18 volt system. Pricing is fantastic especially if you can watch for the sales. Some really good prices out there and some great battery sales sometimes.

So, not the 'best' individual tool, but on balance a good system. My only gripe is when they went to some 40 volt items is they should have stuck with their 18 volt battery architecture and used 2 or 3 in series to get the voltage they wanted.
 

Dusty

Senior Member
Joined
Jun 6, 2013
Posts
1,221
Reaction score
1,262
Location
Rochester, New York
Ram Year
2019
Engine
5.7 Hemi
I have been full circle on this topic myself. Decades back I bought an 18v Makita drill / driver when they were fairly new to the market. I have abused it many times doing things it really shouldn’t like hole saws and concrete drilling yet it has never faltered.

These days I no longer use tools to make money, more the opposite. Working on things is something I enjoy and I do appreciate the feel of a quality tool. A few years back I decided to start investing in cordless as I replaced air or 120v corded tools.

I did some research at the time, and team Red looked more affordable and available, so I bought a couple of Milwaukee pieces. Didn’t think they were as well built as the blue, so when some thieving ****** stole most of those, I gave away the remainder and started fresh with DeWalt. Which have served OK so far, emphasis on “okay”. Under heavy use -beyond their reasonable use to be fair- they don’t push through like the old Makita does.

A while back while on the road I needed a drill for a lightweight task, so I picked up the cheapest thing I could find, a Ryobi. Got the job done, and it’s well worth the price paid. However it’s a grade below the red and yellow in my opinion.

So, this week I decided to spend some more money on blue. When I started the cordless conversion I expected to eventually toss out the old Makita. But it’s still reliable, and the best quality of the bunch I feel. Got a compact 1/2” impact on the way to see of the new stuff is as well built as the old.

If you read this far, I salute you as a fellow tool nut. But isn’t tool use what separates us from the animals? So, what’s your favorite and why?
I converted from Makita to Milwaukee. The cordless Makitas i owned were robust tools, but I had to replace the switches on both of my drills several times. My Makitas were nicad devices and I found the price of replacement batteries quite high.

When I decided to go to lithium-ion devices I decided to start fresh. I did a lot of research on power tools, including some of the online testers. To me it looked like the Milwaukee products I would be interested in were at the high end of durability and reliability.

Regards,
Dusty
2019 Ram 1500 Billet Silver Quad Cab 2WD, 5.7 Hemi, 8HP75, 3.21 axle, 33-gallon fuel tank, factory dual exhaust, 18” wheels. Build date: 3 June 2018. Now at 86143 miles
 

Torque

Senior Member
Joined
Feb 24, 2011
Posts
102
Reaction score
16
Location
Colorado
Ram Year
2003
Engine
Hemi 5.7
I'm team yellow, gray, blue, red, green, and now [dark] yellow (JCB :p) I don't have any allegiance when it comes to corded power tools.

I wanted a cordless impact driver and after seeing the high prices for DeWalt and Milwa (weren't any sales at the time), I happened to see JCB (think heavy equipment) had a line of power tools on Amazon. Since I wasn't part of any cordless eco system yet (only had a very old 12V Craftsman drill with tired NiCd batteries), I figured it's worth a try. A brushless impact driver, two 2Ah batteries and bag for about $70. It has great power and speed and lasts a really long time on one battery. Then I saw Amazon sold bare JCB tools with no battery or bag for cheap too. I picked up the brushless hammer drill for $25. I used the heck out of these tools to remodel my basement and have been extremely happy with their performance. If you use Camel x3 to track the Amazon listings, the prices can swing wildly from heck of deal to same price or more than DeWalt or Mil. Snagged the bare JCB circ saw for $25, a worklight for $10, and an extra 4Ah battery for $40 so I could be using all without swapping batteries between them.
 

Andersoncma

Member
Joined
May 20, 2021
Posts
88
Reaction score
96
Location
Utah
Ram Year
2011
Engine
6.7L Cummins
Milwaukee with Milwaukee branded batteries (even though the Milwaukee batteries could be made in China). Batteries that come branded as Chinese batteries are junk. Pay the extra for the Milwaukee branded batteries
 

jpin9b

Junior Member
Joined
May 2, 2021
Posts
18
Reaction score
21
Location
Up North
Ram Year
2021
Engine
HO Cummins
I've had good experience with DeWalt cordless and corded tools for years and have stuck with them based on experience and batteries.

However, I'm not necessarily stuck to one brand. I just bought a Milwaukee tire inflator and plan to buy one of their impacts. I also own a couple Bosch, Rigid and old-school Skil saw.

That being said, I'm not a tradesman by profession so I don't beat them up as much as some guys do.
 

M376X6

Junior Member
Joined
Jan 1, 2022
Posts
19
Reaction score
14
Location
Colorado
Ram Year
1963, 1965, 1983, 1984, 1985, 2022
Engine
Mopar
Started down the Ryobi path years ago and have had tools from all the names. I am 90% Ryobi and have never had any problem. The older 18V blue tools work just fine with the new type batteries. The one tool I use the most outside of Ryobi is the Milwaukee high torque 1/2 inch drive impact wrench. I believe it puts out over 1,000
ft lbs. of torque. I use it when I'm disassembling trucks for parts and restoration. I don't believe Ryobi has one with that much power. But the Milwaukee was a gift and so the price was right.
 

tgrfan2

Junior Member
Joined
Feb 5, 2021
Posts
8
Reaction score
3
Location
South Carolina
Ram Year
2018
Engine
6.7L
I hear ya! Once you have tons of batteries for whatever brand you are stuck with them.

Ive broken every brand of tool in 25y of construction work. Same goes for batteries. They all suck after a while.
I bought my first yellow set back when 18V came out. I would say I abused them. The original batteries seemed the best of the 18Vs. I broke the handle on my 18V circular saw last fall and decided to go 20V brushless in yellow. If they last half as long as the 18s they will outlast me!
I hate the safety switch but love how it cuts. I also bought a 20V PC "going off display" bundle for the price and vacuum cleaner to go in the RV. I love it so far.
 

CEK3

Junior Member
Joined
Mar 5, 2023
Posts
3
Reaction score
1
Location
Maryland
Ram Year
2021
Engine
Hemi 5.7
Had 12+ Dewalt 18V tools, just recently switched to Milwaukee M12 and M18 tools. Passed the dewalt collection onto my youngest daughter.
 

Tapat1o

Junior Member
Joined
Aug 9, 2019
Posts
8
Reaction score
5
Location
Los ángeles
Ram Year
2004
Engine
5.9
Hilti is the best for contractors, Ryobi is the best for homeowners. I have yet to have a Ryobi drill or any of their power tools break on me. I will say their Dremel knock off sucks though so avoid that one. Their portable battery powered shop vac is awesome, I always keep it in my vehicle.
 

TotallyHucked

Senior Member
Joined
Feb 23, 2023
Posts
405
Reaction score
713
Location
Gainesville, Ga
Ram Year
2017 Sport CCLWB
Engine
5.7
I love red but I have alot of ryobi for the stuff that doesn't get put away hot and wet. You can't beat the cost and versatility of ryobi at the price point. Their cordless brad nailers are built pretty good (AVe Approved them). The tools that get used the most are Milwaukee, 1/2" impact, drills and 1/4 impacts, 3/8" rachets, die grinders etc. Most of my automotive stuff is red basically. I don't do a ton of wood working so I cheap out (router, air nailers blah blah) and the ryobi batteries are cheappppp compared to Milwaukee and the ryobi bleeds over to my 18v lawn tools. I only have 1 dewalt tool and its a corded shorty reciporating saw since Milwaukee didn't offer one. I'm not a fan of Makita but the Rigid brand are really nice actually for the price. If your going to beat on it and use it regularly go with Milwaukee but don't waste your money if your not going to abuse it.
This is exactly why I started swapping over to Ryobi. I've got a couple Milwaukee tools from my racing days but now that I don't make a living with them, I can't justify the price. I LOVE my red electric ratchet but when/if it dies, it too will be replaced with a green one
 
Top