Perform Service reset

JAG55 · Feb 25, 2023

I just replaced the CCV filter and installed a CCV delete kit at the same time on my 2020 RAM 2500. Tried resetting the Perform Service light about 10 times with no success. Used method I found on one of the threads. Any suggestions.

crash68 · Feb 25, 2023

was it this one: (I believe all doors must be closed)
PERFORM SERVICE INDICATOR - RESET
Unless reset the “Perform Service” message will display on the EVIC each time you turn the ignition switch to the ON/RUN position to indicate a emission maintenance is required. To reset the “Perform Service” indicator system (after performing the scheduled maintenance) refer to the following procedure:
1. Turn the ignition switch to the ON position (Do not start engine).
2. Press and release the brake pedal two times.
3. Fully depress the accelerator pedal slowly two times within 10 seconds.
4. Turn the ignition switch to the OFF/LOCK position.
NOTE: If the indicator message illumination when you start the vehicle, the “Perform Service” indicator did not reset. If necessary repeat this procedure.

JAG55 · Feb 25, 2023

That is the procedure I did when I changed the filter. How many times do I have to do it. I did it 10 times already.

Gr8bawana · Feb 26, 2023

When I changed my CCV filter it took me several ties to get the reset to work. I did the same thing every time but I eventually got it right. :cheers:

KoboldTaco · Feb 26, 2023

Where is the part where you do the Hokey Pokey and turn yourself around? I’d love to have been the engineer to have designed that and then spent years laughing at guys trying to replicate it.

It reminds me of the old NES Contra game for unlimited lives Key sequence hah

GTyankee · Feb 26, 2023

for some reason, i thought that it was 3 presses

JAG55 · Feb 28, 2023

Success. Finally got it.

JAG55 · Mar 27, 2023

The perform service light reset for a couple of days and it continues to come on intermittently. Called dealership and the service department said that when you change the CCV filter it also requires to remove and clean the EGR cooler at a cost of about $900.00. They would need the truck for three days. Any feedback on this is appreciated.

Gr8bawana · Mar 28, 2023

Your dealer is full of BS! Your truck does not require EGR cleaning.

Dean2 · Mar 28, 2023

Gr8bawana said:
Your dealer is full of BS! Your truck does not require EGR cleaning.

Absolutely amazing what some of these dealerships will try to pull on their customers. Just one of those and they would loose me as a customer forever.

06 Dodge · Mar 28, 2023

JAG55 said:
The perform service light reset for a couple of days and it continues to come on intermittently. Called dealership and the service department said that when you change the CCV filter it also requires to remove and clean the EGR cooler at a cost of about $900.00. They would need the truck for three days. Any feedback on this is appreciated.

Watch this video about Cummins 67,500 Mile EGR Service DO'S and DONT'S: https://www.youtube.com/watch?v=8GpgpQKxBY0 BTW the newer 2019+ trucks the EGR valve can not be taken apart to clean according to Cummins so how is the dealer going to take it part to clean? Also the 2019+ engines the CCV filter service is not required until 75K...

68PowerWagon · Apr 8, 2023

GTyankee said:
for some reason, i thought that it was 3 presses

Thats the way it was on our Durango & my gaser 2500. Three times done.

Perform Service reset

JAG55

Junior Member

crash68

ACME product engineer

JAG55

Junior Member

Gr8bawana

Senior Member

KoboldTaco

Senior Member

GTyankee

Senior Member

JAG55

Junior Member

JAG55

Junior Member

Gr8bawana

Senior Member

Dean2

Senior Member

06 Dodge

Senior Member

68PowerWagon

Senior Member

Similar threads

Latest posts

Staff online

Members online

Forum statistics

Share this page