Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Besides for the dog's for taking the back seat out and putting in a platform, helluva lot more room for the product when setting up the wife's booth at the vendor show. Got all of this in and it didn't go above the bottom of the rear glass
View attachment 520866
nice stang too!!!Besides for the dog's for taking the back seat out and putting in a platform, helluva lot more room for the product when setting up the wife's booth at the vendor show. Got all of this in and it didn't go above the bottom of the rear glass
View attachment 520866
Finally hooked up the ditch lights (4).
Still need to run some wire so that the switches will be in the overhead console where the (3) switches are for garage door operation.
View attachment 520072
View attachment 520073
View attachment 520074
View attachment 520075
...now your truck displays about the same amount of directional awareness as my wife.Wrapped up the overhead light switch project. Works, and function as I planned. I did go down on switch size slightly, because I wasn’t able to find the three colors I wanted in the original plan, but did find then a size smaller. Which works out good because I was concerned about having a big bright light bugging me from the switch ON. Not an issue now
Also discovered that the garage door controler also controls the compass. With the controller unplugged and removed….. rather than get N, S, E, W indications, now it’s simply dashed lines.
I‘ll have to see if there is a work around for that, as I want everything to function
View attachment 521026
View attachment 521027
View attachment 521028
View attachment 521029
Oh I looked at those. NICE pickup. My only concern is the gas bottle carrier I plan to build for the trips to and from.the welding shop. In my case the two are incompatible.Picked these up today.
Will contemplate how I might want to mount them this weekend.
Ive got a Amp bed extension bar, so can’t utilize both at the same time, but would like to have both mounting hardware in position so I can swap between the two setups as needed.
Looks like the Amp bar mounts might need to be raised up 1/2” or so to do that.
View attachment 521102
View attachment 521095
Thanks. I like the idea of the storage space it can provide, and the fact that they are ‘removable’.Oh I looked at those. NICE pickup. My only concern is the gas bottle carrier I plan to build for the trips to and from.the welding shop. In my case the two are incompatible.
Finally got around to lowering mine. 2/4 Belltech kit.View attachment 521104
It's growing on me. Found it last November in a small town about an hour away. 1 owner, low miles and stock. I just needed to have it because of how ridiculous a full size neon green truck looks.One of my favorite Ram colors
Performance wise I think I'm done, but I've got a couple more cosmetic things in mind on top of what I've already done.I’ve got so many ideas in my head of how I’d mod one out.
Look forward to see which direction you take yours
Performance wise I think I'm done, but I've got a couple more cosmetic things in mind on top of what I've already done.
Changed out the stock grill for a gloss black one, and painted the intake to match and added a Hemi sticker for that old skool look. And I found a Challenger at a nearby dealership I wish I could afford so I could have a matching pair.View attachment 521152View attachment 521150View attachment 521148View attachment 521151