What did you do with your 4th Gen this week?

1SloRam · May 28, 2023

TotallyHucked said:
Changed the earl. Threw about half a bottle of marvel in for good measure. The B-12 is for the next tank of fuel.
View attachment 521843
View attachment 521844

Then washed it and took a couple pictures at an old service station I pass on my way home everyday
View attachment 521845

That PUP is the way to go. Did that and added some lube gaurd..even with LT headers she’s quiet as ever.

1SloRam · May 28, 2023

Prestonguillory14 said:
View attachment 522033
Got a bath today.

Love the headlights.

TotallyHucked · May 28, 2023

Collecting more parts. Went with the RC forged arms with the corrected BJ angle. Went back and forth on these and JBA/Zone. For how I use my truck, these will be perfectly fine. She’s a pavement princess 90% of the time with the occasional job in the back yard or forestry trail ride. So I’ve got these, the 5100 front assemblies, now waiting for the rear shocks to show up and some time to install it all

tones2SS · May 29, 2023

About to give the truck a nice Absolute rinseless wash.
Beautiful weather for it. 65 degrees, sunny and a slight wind here and there.

tones2SS · May 29, 2023

TotallyHucked said:
View attachment 522043

Beefy!!!

Fediej · May 29, 2023

Swapped in a new WIX oil filter and 10.5 quarts of fresh 5-40 Rotella T6 yesterday. Just shy of 90,000 miles.

pacofortacos · May 29, 2023

Just cleaned my TB, hopefully fixes my weird starting issue that started a couple of days ago.

1SloRam · May 29, 2023

pacofortacos said:
Just cleaned my TB, hopefully fixes my weird starting issue that started a couple of days ago.

Did you check codes? Dirty TB would be a rough idle from my experiences. Maybe a vacuum issue.

pacofortacos · May 29, 2023

I didn't, no check engine light on though. Could also be the gas in it, it's been in there since early March and it is pretty warm out right now.
Runs fine after it starts.

Next is some Redline injection cleaner and a fresh tank of gas.

18 ECODiesel Ram · May 29, 2023

Took the ram and the fam on a drive down highway one. We ended the trip by Bixby Bridge.

Heathen-19 · May 29, 2023

Put on a Rustoleum bed liner. Prepping is all about the details. Came out better than expected..

1SloRam · May 29, 2023

Xman19DS said:
Put on a Rustoleum bed liner. Prepping is all about the details. Came out better than expected..

Looks great, good job!
Been wanting to have mine redone as it’s coming off in spots around the top of the bed. Toying with the idea of painting it red afterwards..was told it turns pink quickly which is a bummer.

natehate · May 30, 2023

TotallyHucked said:
Collecting more parts. Went with the RC forged arms with the corrected BJ angle. Went back and forth on these and JBA/Zone. For how I use my truck, these will be perfectly fine. She’s a pavement princess 90% of the time with the occasional job in the back yard or forestry trail ride. So I’ve got these, the 5100 front assemblies, now waiting for the rear shocks to show up and some time to install it all
View attachment 522043

whats up with that square body ?

TotallyHucked · May 30, 2023

tones2SS said:
Beefy!!!

Everybody talks crap about RC but since my truck isn't a hardcore offroader, I figured their new arms would be fine for me. I'm impressed with the quality overall and they were a couple hundred cheaper than the others. We'll see how they do once installed

TotallyHucked · May 30, 2023

natehate said:
whats up with that square body ?

That's my weekend toy. It's an '85 GMC, originally a 305/T350/2.73 long bed truck out of NC. The guy I bought it from had it cut down to a short bed, then I did the 5/7 drop, 20s and cammed aluminum 5.3/4L65/3.90 combo. It's about to come apart again for a T56 6-speed and more goodies.

DILLIGAF · May 30, 2023

Picked up new drill press

natehate · May 31, 2023

TotallyHucked said:
That's my weekend toy. It's an '85 GMC, originally a 305/T350/2.73 long bed truck out of NC. The guy I bought it from had it cut down to a short bed, then I did the 5/7 drop, 20s and cammed aluminum 5.3/4L65/3.90 combo. It's about to come apart again for a T56 6-speed and more goodies.

View attachment 522137

thats rad, squares are my first truck love
im always on the hunt for a decent short box 4x4 to build
but i'm always broke too sooo... one day.
wanna do it like bone stock looking with a 6.0 ls and a better auto trans, 33" tires and factory rally rims

Treburkulosis · May 31, 2023

I let me wife drive it for two days while her Jeep is at the dealership.

TotallyHucked · May 31, 2023

natehate said:
thats rad, squares are my first truck love
im always on the hunt for a decent short box 4x4 to build
but i'm always broke too sooo... one day.
wanna do it like bone stock looking with a 6.0 ls and a better auto trans, 33" tires and factory rally rims

Yeah man, I've always loved squares. I want to add a 4x4 to the fleet eventually, either a single cab longbed up on 35s or a K5 Blazer

Treburkulosis · May 31, 2023

TotallyHucked said:
Yeah man, I've always loved squares. I want to add a 4x4 to the fleet eventually, either a single cab longbed up on 35s or a K5 Blazer

Back in high school my DD was an 83 350/350 swapped SWB black on black square. They are cool trucks. I can not believe how expensive they have gotten. I was always big into slamming the late 80s early 90s square Burbans.

What did you do with your 4th Gen this week?

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Member

Member

Attachments

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Your High End Detailer

Senior Member

Your High End Detailer

Similar threads

Forum statistics

Share this page