2014 ram 1500 7 pin connector

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

weston562

Junior Member
Joined
Feb 12, 2015
Posts
2
Reaction score
0
Ram Year
2014
Engine
Hemi 5.7
hey guys bought a new ram 1500 a couple months ago that does not have a break controller. have read several threads about installing one and am pretty confident about installing that. my question is if the 7 pin connector on the back of the truck is all wired up or its just the connector with no wiring. is there anyway to test or tell if that connector is all wired up?
 

14hemiexpress

Senior Member
Joined
Mar 30, 2014
Posts
3,657
Reaction score
1,205
Location
Texas
Ram Year
2019
Engine
6.4l
Everything is pre wired for factory style brake controller. There will be wiring behind the dash that will be just plug and play. Once you plug it in and mount it in the dash you have to take it to the dealer for a flash so the truck will recognize it.

So to sum it up its all wired all the way to the dash.
 
OP
OP
W

weston562

Junior Member
Joined
Feb 12, 2015
Posts
2
Reaction score
0
Ram Year
2014
Engine
Hemi 5.7
ok thanks. i crawled under the truck and it looked like everything was there. when i bought this truck i didn't realize they still sold trucks without a receiver and was very surprised when i went to put on my hitch. i guess sense you brought it up would you recommend the factory style controller or a "universal" type controller.
 

AllMoparParts.com

- Benny
Supporting Member Supporting Vendor
Joined
Apr 9, 2013
Posts
2,890
Reaction score
911
Ram Year
All
Engine
All

14hemiexpress

Senior Member
Joined
Mar 30, 2014
Posts
3,657
Reaction score
1,205
Location
Texas
Ram Year
2019
Engine
6.4l
ok thanks. i crawled under the truck and it looked like everything was there. when i bought this truck i didn't realize they still sold trucks without a receiver and was very surprised when i went to put on my hitch. i guess sense you brought it up would you recommend the factory style controller or a "universal" type controller.

Yes I recomend it, it is a a little on the pricey side about $400 total vs a nice aftermarket one for 2ish range. They work flawlessly with your truck the controller knows how hard your pushing on the peddle so no harsh brakeing from the trailer it gives you the ability to pre set up to 4 trailers (all set in the head unit under settings) and gives you 4 brake types (see picture) plus it's in the dash no knocking your knee on it the brake grabber is with in wary rehashing distance I absoluetly love mine if it didn't come factory on my truck I would spend the 280 ish for the controller and the 1-120 for the dealer flash. I think it's worth every penny.
 

Attachments

  • image.jpg
    image.jpg
    83.5 KB · Views: 236

14hemiexpress

Senior Member
Joined
Mar 30, 2014
Posts
3,657
Reaction score
1,205
Location
Texas
Ram Year
2019
Engine
6.4l
This is what it looks like installed.
 

Attachments

  • image.jpg
    image.jpg
    78.3 KB · Views: 228

14hemiexpress

Senior Member
Joined
Mar 30, 2014
Posts
3,657
Reaction score
1,205
Location
Texas
Ram Year
2019
Engine
6.4l
Sorry for the multi post didn't feel like uploading these pics to photo book.

Here what it looks like in the basic evic
 

Attachments

  • image.jpg
    image.jpg
    78 KB · Views: 265

Moparguy

Member
Joined
Dec 13, 2013
Posts
47
Reaction score
3
Ram Year
2000
Engine
5.9 V8
I would go with the factory trailer brake controller. It is a clean set up and works a lot better than the aftermarket ones.


Sent from my iPhone using Tapatalk
 

Bigbird

Senior Member
Joined
Feb 9, 2014
Posts
106
Reaction score
52
Location
Arlington Texas
Ram Year
2017 RAM 1500 QC 8sp, 3.21, Lone Star
Engine
Hemi 5.7
I guess I'll just to have to take your word for it Moparguy that the factory brake controller works better than the aftermarket ones. However, I installed a Tekonsha P3 on my 2014 RAM 1500. It works exceptionally well and has a lot of great features. Using the adapter cable made for my truck the installation was very simple. For less than $200, it is a bargan. No dealer flash required.
IMG_5306_zpsb1d08183.jpg
 

Moparguy

Member
Joined
Dec 13, 2013
Posts
47
Reaction score
3
Ram Year
2000
Engine
5.9 V8
I would hit my knee on that every time I got in the truck, that's one reason I wanted to go with the factory style. I only have about $200 in the factory unit and it was installed at the dealer.


Sent from my iPhone using Tapatalk
 

bart98stang

Junior Member
Joined
Dec 15, 2014
Posts
28
Reaction score
8
Ram Year
2014
Engine
Hemi 5.7
I just installed my factory brake controller today on my '14 1500 Big Horn and it was very easy. Took about 45 mins from start to finish. I paid $182 shipped from ebay and dealer is going to charge $60.00 and since its a factory brake controller it will be covered under the 3yr/36,000 factory warranty.
 

Bigbird

Senior Member
Joined
Feb 9, 2014
Posts
106
Reaction score
52
Location
Arlington Texas
Ram Year
2017 RAM 1500 QC 8sp, 3.21, Lone Star
Engine
Hemi 5.7
I would hit my knee on that every time I got in the truck, that's one reason I wanted to go with the factory style. I only have about $200 in the factory unit and it was installed at the dealer.


Sent from my iPhone using Tapatalk

I'm in and out of my truck several times a day and I don't have any problem bumping my knee on it. Looking at the link in your last post, is that a Hayes unit that you bought from Sears? Doesn't look like a Mopar factory unit to me.
 

Moparguy

Member
Joined
Dec 13, 2013
Posts
47
Reaction score
3
Ram Year
2000
Engine
5.9 V8
I didn't post a picture of mine, you must have been looking at someone else's post.


Sent from my iPhone using Tapatalk
 

cptwing

Senior Member
Joined
Aug 14, 2014
Posts
1,446
Reaction score
497
Location
The Soviet State of Connecticut
Ram Year
2014 3500 ST DRW REG CAB
Engine
6.4l Hemi
Bart, I believe your brake controller is covered by a one year parts only warranty.

The way I understand it works is if you have DIO's installed prior to taking delivery, the yes they are covered by the original 3year 36,000 mi warranty. If you drive the tuck off the lot and bring it back later to have a DIO added it is then covered by a one year parts and labor warranty, unless specifically stated otherwise (usually meaning less time not more). If you purchase the DIO and install it yourself it is usually warranted for one year against manufacturer defect or failure. Since you installed it yourself labor is not covered.
 

Bigbird

Senior Member
Joined
Feb 9, 2014
Posts
106
Reaction score
52
Location
Arlington Texas
Ram Year
2017 RAM 1500 QC 8sp, 3.21, Lone Star
Engine
Hemi 5.7
I didn't post a picture of mine, you must have been looking at someone else's post.


Sent from my iPhone using Tapatalk

I didn't mention a picture. If you will click on the yellow link "trailer brake controller" in your post you will see what I mean.
 

The Crow 1994

Senior Member
Joined
Apr 24, 2013
Posts
279
Reaction score
35
Location
Nebraska
Ram Year
2013
Engine
Hemi 5.7L w/8 Speed Trans.
I didn't mention a picture. If you will click on the yellow link "trailer brake controller" in your post you will see what I mean.

I don't see a link in any of his posts in this thread. If I don't log into this site, it will give me links to common words that take you to other sites. Not sure if that's what happened here or not.

Anyhow, brake controller looks good. If it's operational and you like it...that's all that matters. :)
 

Forum statistics

Threads
213,354
Posts
3,092,143
Members
174,575
Latest member
DITRIO
Back
Top