I have a 2022 longhorn I bought it in Arizona . I live in California I need to mount a front plate . the bumper has 3/8" drill in it. what to use to attach the front plate. I have searched the forum with no results. I have tried the square nylon inserts they don't work in a round hole.
I have looked through the Owners manual with no solution . I have the split screen with radio on the bottom and comfort on the top. I want to put the Navi on the top. I can't find how to get the comfort off to put the navi on top.
I have a 2022 Limited Longhorn 5.7 with 508 miles. E-t0rque is not on . I have gone into the Favorite's menu and click on Start/stop nothing. I have pushed the A circle button below the 4 wheel drive selector . I have tried with the light on and off . Nothing. What am I missing.
OK I looked in the owners manual (I know I should have looked there first. I'm 72 that's my excuse ) It is fuse F09 for the left and F10 for the right . F09 was blown . I replaced the fuse and hookup the trailer and it is working. Thank you for the replies
The left turn signal and brake light to the trailer are not working. The trailer lamp is working . I tested it with my Fluke mutimeter and there is no voltage at the pin connector on either the 4 pin or the 8 pin. Does anyone know if there is fuse in the circuit??
I went out this morning and it is working as it should . I was at the dealer yesterday and they couldn't get to work . Called them up and they said that was probably doing a software update via U-Connect yesterday.
I have a 2019 Laramie 4X4 . The backup camera has stopped working. Just a blank screen . Stopped at the dealer and they think it is a software update . Scheduled for Wed. the 13 to update the software. Everthing else is working on the 8.4" screen. Any ideas ?? No codes.