Search results

  1. B

    Blower motor

    I'm having a very similar issue with my truck too.
  2. B

    New to forum's please help bleed screw

    Well the heat on the drivers side is now blowing cool air again. It was great for the last 8 days. If the coolant is clean and looks fresh do I still need to use rmi 25?
  3. B

    New to forum's please help bleed screw

    By doing a heater core flush I pulled off heater hoses and sprayed water into the end of the hose. The other heater hose I connected an adapter to make hose longer. Sprayed water came out of the other hose and into a bucket. I did this procedure for both hoses. Where the water pump connects to...
  4. B

    New to forum's please help bleed screw

    I followed the your advice and got the system bled. I have heat!!! My Temps are now 142.7 degrees driver and 141.3 degrees passenger side. I used the same thermometer for each test.
  5. B

    New to forum's please help bleed screw

    Ok. That makes sense. Thanks
  6. B

    New to forum's please help bleed screw

    Ok. I checked the blend door actuator behind the glove box. It moves just fine with the different temps. Tomarrow I will try to check the actuators under the radio. When I opened the bleed valve a lot of coolant came out. Would this mean ot was over filled? Do I let it bleed out from the plug...
  7. B

    New to forum's please help bleed screw

    It's just under the coolant temp sensor.
  8. B

    New to forum's please help bleed screw

    The coolant bleeder is on the water pump housing. It's very close to the thermostat housing.
  9. B

    New to forum's please help bleed screw

    Hi. New member and first post. 2009 ram with 5.7 hemi. I tried to flush heater core today bc I get 73 degree air thru my drivers side and 102 degree air thru passenger side. This truck is new to me. Bought a week ago. Anyways I go to bleed the air out of the system and coolant squirts out and...
Top