Search results

  1. wayned87

    5th Gen side mirrors on a 4th Gen Ram

    My turn to see if anyone bites at this. I am in a similar situation, I got my hands on some 2022 2500 new take off mirrors for cheap. Seeing what is involved to get them working. I have been looking into the connectors and the wiring is quite a bit different. If I cant get them working I might...
  2. wayned87

    Rear Heated Seat - Harness Module Wires Element (s)

    Do you have the correct bluetooth obdII connector? I am not sure about that message.
  3. wayned87

    How to: Add Dual Zone ATC to a Tradesman

    Yeah there’s a few, it’s pretty darn simple, if you can change an air filter then you’re good. Lol
  4. wayned87

    How to: Add Dual Zone ATC to a Tradesman

    Yes this is similar to what I did. I bought the following: Full blend door kit, (could have just bought the 1 blend door for DZ). Used DZ harness. Used actuators. Then programmed! The HVAC box literally just comes apart with clips and a few screws.
  5. wayned87

    Rear Heated Seat - Harness Module Wires Element (s)

    Long story short, it was pretty exp to go new. So I waited and found some parts from a 2015 Laramie that was wrecked. Bought those parts as I ended up spending about 20% of the new cost. After I got all the parts swapped I used AlfaOBD to enable the items. So far all works as normal as it...
  6. wayned87

    Change battery on TPMS?

    Not sure if it matters to anyone, but the batteries I bought were the EXACT replacement, same company (Panasonic), same logo, same everything. Pure identical matches haha
  7. wayned87

    Change battery on TPMS?

    Alright guys it worked! I bought the link above. Said it was going to be like 5-6 weeks to get them shipped but I got them in roughly 2.5 weeks. Cut my old ones open. Really just popped the white/clear backing off of the sensor, pulled battery and green board out. Replaced the battery, and...
  8. wayned87

    Adding front parking sensor/or camera

    I haven’t officially pulled the trigger on this but I’m thinking this is my next mod. Any suggestions? 2015 2500.
  9. wayned87

    Change battery on TPMS?

    Really really old thread but, here is my $.02. I had a few of these laying around for my 2015 2500, that have dead or low batteries. I figured instead of throwing them in the trash I'll cut one open just to see what the battery looks like. Especially the current price on these new right now...
  10. wayned87

    How to: Add Dual Zone ATC to a Tradesman

    Yeah that’s not too bad. I am sure with shipping you might be pretty close. I took a bunch of videos when I did this to make a nice DIY. I am just trying to find a good program to download on the MacBook to piece them together.
  11. wayned87

    How to: Add Dual Zone ATC to a Tradesman

    I would like to add my $.02 in here so that hopefully it helps or saves someone some money or possibly time. I have a 2015 RAM 2500 SLT Cummins. I have upgraded the truck to a full Laramie, yes all down to the wiring harnesses. (I was able to get my hands on salvage truck parts for cheap)...
  12. wayned87

    How to: Add Dual Zone ATC to a Tradesman

    If anyone is in need of a blend door actuator let me know, I have 3 available. I purchased the "dual zone" harness from eBay and it came with extra actuators. I also have my factory "single zone" harness if anyone would want to use it instead of cutting/splicing or making their own, you could...
  13. wayned87

    Wanted: Tailights, Headlights

    I think you quoted the wrong guy lol, I still have mine for sale.
  14. wayned87

    Wanted: Tailights, Headlights

    Shoot me a PM, I have the factory ALL black projectors with high/low HIDs, that would be plug and play for ya. The HIDs are the lifetime replacement from headlight revolution. I also have the adapters if for some reason you would need them.
  15. wayned87

    How to: Add Dual Zone ATC to a Tradesman

    Well just my luck, after purchasing ALL parts except for the Distribution Housing box, I finally pulled the trigger. I was waiting and waiting hoping to find the box cheaper or for it to randomly come down in price, but it did nothing but go up in price. So I went ahead and purchased. Now the...
  16. wayned87

    How to: Add Dual Zone ATC to a Tradesman

    Just an FYI for some - I have a 2015 RAM 2500 Mega Cab with full center console. I reached out to Benny with allmoparparts.com, and he came up with this part number 68197463AC. This part is anywhere from $300-$400 shipped, depending on the website. Anyone else know of a cheaper part number...
  17. wayned87

    Radio bezel

    If this is still available, would you sell just the screen bezel with climate controls?
  18. wayned87

    How To: Add Factory Keyless Enter N Go

    I haven’t done the push button remote start yet on a cold engine but there shouldn’t be any difference as I did not mess with any of those settings.
  19. wayned87

    How To: Add Factory Keyless Enter N Go

    Now that it’s cold and my grid heater is cycling, I noticed when I jump in the truck and hit the brake pedal and start button it’ll fire right up without cycling the grid heater. So I hop in, hit the button twice (without brake pedal pushed), let the grid heater cycle and then brake pedal and...
  20. wayned87

    How To: Add Factory Keyless Enter N Go

    I just did this to my 2015 2500 Cummins and there was no difference that I found.
  21. wayned87

    Program Erase Key Fob (Fobik)

    I see now and that makes complete sense. Thank you for your input.
  22. wayned87

    Program Erase Key Fob (Fobik)

    So I have read on quite a few threads about programming and erasing fobiks using the AlfaOBD. I would like to share my experience on what I did and what worked for me. I have the "push to start / keyless n go" system. I purchased 2 fobiks off Amazon, link from @Jimmy07 in the "How To: Add...
  23. wayned87

    How To: Add Factory Keyless Enter N Go

    I just finished my install, and ABSOLUTELY love it!!!!! I can't thank everyone enough for all the input, ideas, concerns, etc. throughout this thread. My truck is a bit different and Chrysler does not make the proximity handles in my color, so I searched for the cheapest ones possible...
  24. wayned87

    How To: Add Factory Keyless Enter N Go

    Hope this helps somebody down the road, this is the factory location for the door antennas.
  25. wayned87

    How To: Add Factory Keyless Enter N Go

    Just wanted to throw this our there for anyone that might be having problems like "TPMS won't connect with sensors". It took my truck a good 15-20 miles for it to actually recognize the sensors. The "TPM Sensor Rolls Test" would not work, etc, couldn't get anything to work. Long story short...

Latest posts

Forum statistics

Threads
195,392
Posts
2,869,629
Members
156,052
Latest member
corumba
Top