Search results

  1. Mike77

    Lifted/Towing w higher stall converter

    Following as well. Can't seem to get ahold of Matt at Moes for the last 3 weeks. Circle D recommended a 3200 stall for me (occasionally tow a 3000lb trailer, 8 speed 3.21 gears.) I am planning a Whipple in fall.
  2. Mike77

    Enable Brake Controller Sales Code

    Thanks again for all the info! Just for clarity, I can use my android phone (instead of an android tablet)?
  3. Mike77

    Enable Brake Controller Sales Code

    I used to tune with efilive when I had my LS1 Trans Am, so I'm familiar with ecu parameter changes. I do have a question though on the android vs windows. I have a laptop with windows 10, and an android phone. I'm guessing I'd be better off going with windows for sake of being able to...
  4. Mike77

    Enable Brake Controller Sales Code

    Thank you!!
  5. Mike77

    Enable Brake Controller Sales Code

    2015 Ram 1500 5.7 Hemi. What's the best way to do this myself (without taking it to the dealer?) Can you recommend the best way to accomplish this (alfaobd, etc). I'd rather spend my money on a software platform than pay the dealer labor. Thanks!
  6. Mike77

    Edge Pulsar 32450 2015-2018 Ram 1500 5.7

    Item is sold. Thank you guys for the interest!
  7. Mike77

    Edge Pulsar 32450 2015-2018 Ram 1500 5.7

    I'm selling my Edge Pulsar #32450. I ran this for a year and a half on my 2015 Ram 1500. Noticable "seat of the pants" power increase on settings # 6 and #8. I had no issues with it at all, my powertrain warranty is up so now I'm going with a full tune. I have not done any updates on the...
  8. Mike77

    Anchoring a Fox Dual 12" Ported Box

    I just ordered a fox acoustics dual ported 12" box for my 2015 Ram 1500 Crew Cab. How are you guys anchoring this box? Usually I'd just drill through the bottom of the box and floorboard and run a bolt through but I don't see the plastic tubs being suitable for that.
  9. Mike77

    Singer Alternator, shorter serpentine belt help

    Thanks guys I'll give that a try. I'll also post up the part # to help out if someone down the road needs it as well.
  10. Mike77

    Singer Alternator, shorter serpentine belt help

    I have a 2015 Ram 1500 with 5.7 Hemi. I just ordered a Singer 270 amp alternator to keep up with the demands of my stereo (my lights are dimming, even after doing the big 3) Singer suggests a serpentine belt 1/2" to 1" shorter than OEM due to the smaller pulley used. Anyone have a part #...
  11. Mike77

    P0335 Crankshaft Position Sensor

    I was pulling into a parking lot this morning, my lights dimmed a little and the engine stalled and the check engine light was on. I pulled the code and it's P0335 for Crankshaft Position Sensor. I tried clearing out the code but it's a permanent code that it will not allow me to delete. Is...
  12. Mike77

    Edge Pulsar up indates

    So the update is more than just speedometer correction and display changes? Anything change performance wise?
  13. Mike77

    Big 3 Engine Ground

    I'm doing the big 3 upgrade and need some input for where to ground the engine. Some say to use the alternator mounting bolt (#1), or I was even thinking bolt #2? Where are people bolting their engine ground to? Thanks for the help!
  14. Mike77

    Edge Pulsar up indates

    Just a thought......the allure of the Pulsar is that the dealership cannot detect if there has been one used/installed after its removed from the vehicle. By doing an update through the ODB port and through the OEM computer to the Pulsar, won't that set off some red flags? I'm just...
  15. Mike77

    Edge Pulsar up indates

    Exciting news!
  16. Mike77

    Bluetooth PC31 Pedal Commander

    Sold
  17. Mike77

    Bluetooth PC31 Pedal Commander

    I'm selling my Bluetooth PC31 Pedal Commander. I purchased it a little over a Month ago. I have the Edge Pulsar tuner and the throttle setting on #8 is too sensitive for everyday driving. I purchased the Pedal Commander in hopes that I could dial back the sensitivity to a more livable level...
  18. Mike77

    Stuck on install, need help!

    Agreed. I was too far into it to try to resolve it via phone and wait for a new one to be mailed to me. I had all leads soldered in and everything good to go, the radio just would not power on through their harness. Sucks I hacked up the $80 harness AND my OEM harness (which I wasn't wanting...
  19. Mike77

    New guy, radio/bluetooth issues??

    Mine does the same thing. I think its normal
  20. Mike77

    If your thinking of a k&n cai system....

    I'm happy with my kn, it seems to pull smoother in the upper rpms
  21. Mike77

    Slight “Clunk” when stopped

    I lubed my driveshaft joints and the clunk went away.
  22. Mike77

    Edge pulsar

    I've been happy with mine so far, no issues.
  23. Mike77

    Edge Pulsar

    Love mine!
  24. Mike77

    How to change setting on Pedal Commander without tripping CEL

    I found that as long as my foot is off the gas I'm good to go. Haven't had any cel's that way
  25. Mike77

    Plasti-Dipped My rims and badges

    Looks great!
Top