Search results

  1. T

    Weird dinging with right turn signal

    When using my right turn signal during the daylight it works as it should however once I turn my headlights on and use the right turn signal it operates fine except a dinging like door ajar happens simultaneously while blinking.very weird anyone ever had this happen? 03 ram
  2. T

    AC issues

    I think it's another door or actuator too. I am working to get the AC operating properly,I could understand if I was trying to get heat and the heater core was partially clogged but it seems there would be a door blocking the heater core from the AC system
  3. T

    AC issues

    My AC in my ram.is blowing cold just on the driver side,the passenger is blowing warm.upon investigation I found the recirculation blend door was broken ,so I replaced it with new.I made sure that when the selector knob was set to cabin recirculation the new blend door was open(towards the back...
  4. T

    DRW tailgate brake lights

    I have a 03 Dodge ram 1500.The truck has been wrecked and have rebuilt it and now I am down to knick knack stuff and one is I need to know how to mount the actual on the tailgate light,what hardware is required? I ordered an aftermarket tailgate and they sent me one for a 3500.The company...
  5. T

    EGR blank off kit

    I know they exist,I've seen pics of the kit but I can't find it in anyone's online stores.I really don't want to do the homemade methods.
  6. T

    EGR blank off kit

    I have an 03 dodge ram that has a blown 5.7 engine so I am going to swap in another from my 05 ram that got totaled.the 05 has an EGR valve and the 03 didn't have one,I thought I would just put a delete kit,block off plate.I have been searching the Internet for hours looking for it and am having...
  7. T

    jams up while spinning over

    230k,is the 5.7 an interference fit motor?
  8. T

    jams up while spinning over

    Yes,I assumed an internal but what are the usual suspects in the 5.7? Bent valves,timing components?
  9. T

    jams up while spinning over

    I have a 2003 ram 1500 with 5.7l I just acquired, the PO claimed it needed a new flex plate and starter. After pulling the starter and looking at the ring gear I do not believe this to be true. We put the starter back in and got it to bump a revolution or two, but it hits a hard spot and jams...

Latest posts

Staff online

Members online

Total: 856 (members: 12, guests: 844)
Robots: 483

Forum statistics

Threads
200,925
Posts
2,933,648
Members
164,830
Latest member
NE5784

Share this page

Top