Search results

  1. J

    Need helping figuring out 2011 factory suspension please.

    Thank you
  2. J

    2011 1500 5.7 3.55 limited slip. Any done dif bearings???

    Thank you
  3. J

    2011 1500 5.7 3.55 limited slip. Any done dif bearings???

    And yes. I agree with you. Let the mechanic let at it. I always tell the mechanic what I think and where to check. But to always check it out first and trust them. When the TIMP went a thought fuel pump as most do. So a bought a new pumped to have for the mechanic. He said right away, it...
  4. J

    2011 1500 5.7 3.55 limited slip. Any done dif bearings???

    Yeah usually you cover the parts cost as you do get new parts. But labour is taken off. Some want to be paid regardless. I have a good guy. He does honest business. I will start with that check list. Definitely will check the brake shoes. Sounds does seem to becoming from the dif u joint area...
  5. J

    Need helping figuring out 2011 factory suspension please.

    The coils on the 6112s look smaller then the factory coils. That unit looks like it you fit inside the factory coil. Is it ment to be like that. Having 2 two coils. Or is that the whole unit.
  6. J

    Looking for advice on rock gaurding and roll on bed liner.

  7. J

    2011 1500 5.7 3.55 limited slip. Any done dif bearings???

    I forgot tk ask what do you mean by center shaft bearing?. I have one drive shaft and 2 u joints.
  8. J

    2011 1500 5.7 3.55 limited slip. Any done dif bearings???

    Will definitely go through that check list first. It not about saving the money. I don't mind spend it if it needs it. But nothing worse then fix something and still have the same problem or sound. We all been there before. That's why I tell hypochondriacs a doctor is no different then a...
  9. J

    2011 1500 5.7 3.55 limited slip. Any done dif bearings???

    Thank you very much. I do have a broken hold down spring on the brake shoe. Was like that several years ago when I did the the calipers rotor and pads on the rear. I don't use the break, and it was quite for a couple years after I did the breaks. Didn't think much of it. Was planning to address...
  10. J

    Looking for advice on rock gaurding and roll on bed liner.

    Everything gray is covered in black now. Have to take some new photos. Not going to offer doing the frame or floor. That killed me. Been was in the hospital the past year. Had to shut down my renovation company. Rather limited in my abilities now. But can still get it done some how.
  11. J

    Looking for advice on rock gaurding and roll on bed liner.

    Hey guys I been freshening up my 2011 1500. Did a two tone roll on industrial coating on the truck and everything underneath. Two coats of flat Grey first. Went pretty well, and was thinking of doing some ads for next season to do other people's trucks. I was thinking fir charging flat price...
  12. J

    2011 1500 5.7 3.55 limited slip. Any done dif bearings???

    I see. Thank you. I know it was recalled for pinion bolts and was done before I bought it. Will have to do more research. Just want to get it right the first time.
  13. J

    2011 1500 5.7 3.55 limited slip. Any done dif bearings???

    Sorry I didn't know where to post this. 245000km a while ago my mechanic said he he noticed a high frequency vibration coming from the drive shaft after he did the u joints. And I recently moved found another good mechanic, he notice a grinding nose from the dif when going slow in the parking...
  14. J

    Have you heard about 2011 RAM 1500 5.7 cam and lifter issues.

    Looks good. Works well with the blue. I was back on forth on doing it. The passager door had some paint peel on the bottoms I had to take it that high. Went off the curve in the sheet metal. I that to paint it tan like the interior, would have work with the dark down. But durability was most...
  15. J

    Have you heard about 2011 RAM 1500 5.7 cam and lifter issues.

    Thanks a lot. That helps and is some peace of mind. I still have my 2000 Ford F150 4x4 4.6v8 from new when I was 16. It still runs. But needs a body over haul. Never thought I would have a dodge. But I am beyond impressed with this vehicle. My Ford eats ball joints and tie rods cause of torsion...
  16. J

    Have you heard about 2011 RAM 1500 5.7 cam and lifter issues.

    I have a 2011 slt 4x4 5.7 hemi. I heard some of them are common tk have lifter and cam issues. I would like to know more about this. I bought mine 7 years ago with 140000 km and now have 245000. It is running tip top now. J did the camshaft celenoids and new intake manifold gaskets plugs rad...
  17. J

    Need helping figuring out 2011 factory suspension please.

    Hey everyone. I have a 2011 ram 1500 quad cab 4x4 5.7 factory 20 275 65 wheels. I would like to order quick struts for the front and new coils and shocks for the year. My build sheet says it has heavy duty suspension package. Everyone says the suspensions are the same for all the 1500 SLT...
    • Jory
    • Thread
    • Replies: 5
    • Forum: Lifted
  18. J

    ADVICE NEEDED ON THE P000B Code

    are you able to send a link or a pic of the part you are talking about
  19. J

    ADVICE NEEDED ON THE P000B Code

    I have a 2011 5.7l ram. I been getting the P000B code. $07E8 B camshaft position slow response Bank 1 I which side is bank one. driver or passenger side? This refers to the MDS camshaft celenoid. How many camshafts celenoids are on a 2011 ram 5.7 hemi. I understand it is four on them. but...
  20. J

    2011 Ram. Cranks but wont turn over.

    If the bypassed the fuel pump relay is that in the TIPM. or is that relay on top of the fuel tank?
  21. J

    2011 Ram. Cranks but wont turn over.

    independant shop looked at it. with covid the dodge dealers are booking so far out in my area. the timp is a rebuild the only thing I could find in stock and had to be shipped. My truck has factory remote start. I haven't used it since this has happened. I was wondering if that is a possible...
  22. J

    2011 Ram. Cranks but wont turn over.

    My Ram 2011 ram 5.7 slt was driving fine park it at home running perfect at the end of the day, the next morning it wouldn't turn over. I thought it was fuel pump. The shop said the pump was fine and had full pressure. They said it was the TIPM. They bypassed the relay and got the truck to...
  23. J

    Please Help. TIPM advise 2011 Ram 5.7

    I heard a hard reset will did it. Zip tie the the battery cables together to drain the compasotors.
  24. J

    Please Help. TIPM advise 2011 Ram 5.7

    I have a 2011 Ram 5.7L Been running great and looked after. Parked it at home a month ago the next morning it cranks but won't turn over. I thought fuel pump. The shop said it was the TIPM. the fuel pump had full pressure. But not getting spark. They got the truck to run by using these relays...
  25. J

    2011 Ram 5.7 camshaft selonoid????

    I have been sent this vid twice. It doesn't tell me if there is one or two of these oil control valves. I will see my parts guy tomorrow. he should be able to the drawings.

Latest posts

Members online

... and 15 more.
Total: 1,268 (members: 65, guests: 1,203)
Robots: 1,082

Forum statistics

Threads
201,875
Posts
2,945,502
Members
166,323
Latest member
Lhudd54

Share this page

Top